The kitchen is a region where the usage rate is high in daily life. Therefore, it is also necessary to spend a little time on the decoration. It is necessary to consider safety issues and consider its functionality. But often many owners of the decoration is not satisfactory, not rectification is unreasonable, is not satisfied with the decoration, today Xiao Bian gave you talk about, we must pay attention to the four details!
First, water changes can only be changed to water
The current design of the new center kitchen tends to be reasonable, basically two-way water supply, and reserved two to three sockets such as microwave ovens and exhaust fans, so the changes to water and circuits are not significant. However, if it is an old house, it is generally a single-way water supply. Therefore, in the kitchen renovation, it is best to add a hot water pipe. What needs to be reminded is that due to structural restrictions, changes to the waterway can only be changed to water and cannot be changed.
Second, don't make an open kitchen
Many families pursued fashion and made the kitchen open-ended. They waited until they were used. They started to get dumbfounded because the cooking fumes in China are so large that they cause fumes in full houses. This not only pollutes indoor air, but also causes household smoke to corrode homes. Electrical appliances. Therefore, the owners who want to decorate the open kitchen must be clear!
Third, it is best not to easily change the gas pipeline
Due to the constraints of the housing structure, gas and natural gas pipelines must not be arbitrarily changed. If you have to change, you must go through the property company's agreement. When the changes are made, due to the strong professionalism, at the same time for the convenience of future maintenance, the professional company designated by the gas, natural gas company or property company is usually responsible for the construction.
Fourth, we must measure the size of the cabinet
Usually in the kitchen before the renovation, from the cabinet manufacturers to the kitchen for measurement, in addition to the size, but also take a look at the original location of various pipes is appropriate, if it is inappropriate to change, will give a copy of the drawings to the decoration company, The construction team will carry out necessary modifications according to the drawings. It should be noted that if the cabinet manufacturers do not measure, or the construction team does not strictly follow the dimensions, there will be cases where the cabinet interface is not up-to-date because of the size inaccuracy. This is also a problem that the owner needs to pay attention to before the decoration. However, everyone is best to go to the market to choose the cabinet, or wait until the decoration is almost, and then go to see the kitchen is always a little rush, but also to facilitate the construction of the master, does not delay the construction period.
Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).
Kitchen decoration
Reed Switch Fuel Level Sensor, also called float fuel level senosr, it is done by sealed reed switches positioned inside the main shaft of the sensor. A float with built-in magnets then triggers the reed switch relays, generating a potential-signal with resistance, current, or voltage value that increases or decreases according to the fluid level, then give the signal to the gauge via wires, which shows the right level reading by pointer. In the whole reed switch level sensors,the float is the only moving part of the sensor,thereby minimizing potential mechanical failures to get the precision measurement.
Reed Switch Fuel Level Sensor,Fuel Float Sensor,Fuel Tank Float Sensor,Float Level Sensor, Float fuel level sensor
Xi'an Gavin Electronic Technology Co., Ltd , https://www.cngamicos.com