The article comes from the network, it is forbidden to reprint!
Flap Disc Adhesive
Single component Flap Disc resin adhesive glue for making flap disc:
Flap disc adhesive usage:
Composition ratio: A: B = 100:25 (weight ratio)
Available time: 25℃×25-35 minutes
Curing conditions: 25℃×4-5 hours of basic curing
72 hours for maximum strength
Flap disc adheasive glue features:
1. This single component expoxy glue is a room temperature solidification type, yellow brown viscous epoxy resin adhesive;
2. This flap disc epoxy glue can be cured at low or normal temperature, with fast curing speed and certain stop-flow;
3. after curing, the bonding part has high bonding strength, shock resistance, shock resistance, good hardness and good toughness;
4. good acid and alkaline resistance, moisture and waterproof, oil and dust resistance, moisture and heat resistance and atmospheric aging;
5. curing products have good insulation, compression resistance, high bonding strength electrical and physical characteristics.
Scope of resin flap disc glue application
1.. Flap wheel with handle chuck, flap disc, flap wheel, vertical flap disc, plastic flap wheel.
2.. ceramics, wood, glass, fiber products and hard plastic packaging bonding, has excellent bonding strength;
3.. not suitable for bonding elastic or soft materials.
The related abrasive products we can supply is Flap Disc Backing Pad, Abrasive Flap Disc , bonded abrasives, and Abrasive Machine such as Flap Disc Making Machine,Abrasive Belt Making Machine, Flap Wheel Machine , Polishing Machine ,Sanding Disc Machine, if you have any needs about abrasive tools, please kindly feel free to contact us.
Single componet epoxy adhesive,Flap Disc Adhesive,Flap Disc Epoxy Glue,Synthetic Resin Flap Disc,epoxy resin for flap disc
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com