The installation of cabinets includes cabinets, hanging cabinets, countertops, hardware and other components. Whether the installation of cabinets is in place is not only directly related to aesthetics, but also related to whether it is satisfactory in the future. Therefore, the cabinet must be installed according to the steps and handle the details.
Although the cabinet installation does not require the owner to directly do it, but if you know some installation strategies in advance, you can get twice the result with half the effort.
Cabinet installation steps
Cabinet installation generally requires two technicians. After entering the cabinet, the cabinets are basically installed in the order of cabinets, hardware, countertops, cabinets, stoves and appliances.
First, the ground cabinet installation
The installation of the cabinet is divided into three steps, measuring the size, finding the reference point, and connecting the cabinet.
Before installation, workers should clean the kitchen floor to accurately measure the ground level. When installing, if the cabinet and the ground can not reach the level, the gap of the door can not be balanced.
If the cabinet is L-shaped or U-shaped, you need to find the reference point first. L-type cabinet installation should be extended from right angle to both sides. If it is installed from the two sides to the middle, there may be gaps; when installing the U-type cabinet, the middle-shaped one-piece cabinet should be placed neatly and then from two right angles. Place the two sides to avoid gaps. After the floor cabinet is placed, it is necessary to level the floor cabinet and adjust the level of the cabinet by adjusting the legs.
The connection between the cabinets is an important step. Generally, four connectors are required between the cabinets to ensure the tightness between the cabinets. In order to save costs, some cabinet manufacturers use poor quality self-tapping screws to connect, which not only affects the appearance of the cabinet, but also has a low connection.
Second, hardware installation
In order to avoid the wood chips falling into the basket track when installing the hanging cabinet and the countertop, cover the basket with the covering to avoid affecting the future use. In case of special circumstances, the method of on-site opening may be used. The hole shall be drilled according to the size of the pipe with a professional puncher. The diameter of the hole shall be at least 3-4 mm larger than the pipe, and the hole shall be opened after punching. Partly sealed with a sealing strip to prevent water from swelling and deforming at the edge of the wood, affecting the service life. In order to prevent water from seeping the water basin or sewer, the connection between the hose and the water basin should be sealed with a sealing strip or glass glue. The hose and the sewer should also be sealed with glass glue.
Third, the cabinet installation
When installing the cabinet, in order to ensure the level of the expansion bolt, it is necessary to draw a horizontal line on the wall. Under normal circumstances, the distance between the horizontal line and the table is 650 mm. Consumers can adjust accordingly according to their height to facilitate future use. When installing the wall cabinet, it is also necessary to connect the cabinet with connectors to ensure tightness. After the cabinet is installed, the level of the cabinet must be adjusted. The level of the cabinet directly affects the aesthetics of the cabinet.
Fourth, the countertop installation
The installation of the countertop should pay attention to the bonding time of the glue in different seasons. At present, the countertops used by consumers are mostly quartz stone, acrylic artificial stone or natural stone countertops. Some stone countertops are made of several pieces of stone. The bonding time, the amount of glue used and the degree of sanding will affect the appearance of the countertop. Generally, it takes half an hour to bond the table top in summer and one hour to one and a half hours in winter. When bonding, use professional glue to bond. In order to ensure the beauty of the countertop joints, the installer should use a sander to polish and polish.
Five, stove appliance installation
Install the cooker appliance to pay attention to the layout of the power hole, the size of the cooktop and the safety of the air inlet. Installation of embedded electrical appliances only requires opening the power supply hole. However, the power supply hole cannot be opened too small to avoid disassembly during future maintenance. Some consumers require workers to wrap up because of the unsightly appearance of water meters and gas meters. If workers wrap water meters and gas meters, it will be very troublesome to repair them in the future. The state also has regulations that do not allow the packaging of electricity meters and gas meters. In order to ensure the use of the range hood, the distance between the range hood and the cooktop is generally between 750-800 mm. When installing the range hood, it should be aligned with the left and right sides of the cooker. The height can be adjusted according to the actual situation. The most important thing to install the cooker is to connect the gas source. Make sure that the gas port is not leaking. The gas source is usually connected by the natural gas company. If it is installed by the decoration worker, it is necessary to let the gas company workers come to the door for inspection.
[Scan the QR code below, pay attention to the WeChat public number "Jiuzheng cabinet network "; you can view the popular article " A cabinet boss compiled the oil poems, fire all over the circle of friends ", want to communicate with peers can join the Jiuzheng building materials network cabinet exchange group]
Copper Tube,Refrigeration Copper Tube,Air Conditioning Radiator,Copper Tube Fittings
Suzhou Green New Material Technology Co., Ltd. , https://www.szgreenvip.com