Chromium powder pressure ball machine new motor bearing heat causes?

Chromium powder pressure ball Machine new motor bearing heat causes?

When the newly installed chrome ball press machine motor is under empty load, the problem of abnormal bearing temperature is often found. This is mainly related to the fact that the chrome powder ball press has too much grease on the bearing or when installed. As long as the baffle on the lower part of the bearing is pulled out, excess grease from the chrome powder ball press motor will flow out of this port and the temperature will drop quickly. If this method does not work, it must be analyzed specifically because of the installation deviation or the quality of the motor bearing. The specific reasons are as follows:  
1 It may be that your chrome ball press grease is too much.
2 It may be that the bearing temperature is high and exceeds the upper limit of the grease's use temperature, causing the oil to deteriorate. It is recommended to replace the high temperature grease.
3 It may be wrong to use the wrong grease grade. It is better to replace the chrome powder with a smaller cone.
In addition: The consistency of the grease is also related to the temperature. In general, the higher the temperature, the thinner the grease is.  
If you want to learn more about the information online, you can directly call it. Or click on the content to view:   Briquette press machine    Paint bucket grinder    FGD gypsum pressure ball machine   Crusher hammer    Caiwa Machinery    Slag pressure ball machine    Corn dryer    Straw crusher    Foam granulator