CTY-2.5T scraper technical transformation

The Xinjiang Agricultural Mechanization Corps has a Ministry of the Ministry, there are some questions in the 12.5-inch hydraulic drag process. The main reason is that the opening of the bucket door is too low and the front part is filled with a large amount of earth. Under the soft soil conditions, the earthworm phenomenon is aggravated. As a result, the work resistance is increased, the working efficiency is decreased, and the operation cost is increased. In response to the above situation, we have modified the scraper.

The isosceles trapezoid of the gas welding block 28,1 in the lower middle position is suitable for not damaging the part of the rib bead, the original doubling door is divided into two parts, and then the upper part of the two parts is hinged to maintain the original kimono. The design angle is such that the valve will not be closed when closing the door.

The principle of modification; the valve is pushed open by the thrust resistance of the bauxite in the front of the bucket, and the trap is closed when the soil is lifted in the transport position after the soil is filled.

After the use of the above effects, the operational efficiency of the GM has been greatly improved, and the distance between the completion of the second shovel operation has been shortened from the original 50 to the current time. Each shift has saved 58 flavors of the main oil, and the front pile dirt has been eliminated. .

The Agricultural Division Ten Missions Division Guo Junjiang invites and prepares, and there are 31 existing chain tractors, 72 large and medium-sized tractors, 24 combine harvesters, and 4 small-wheels. In 1999, there were many agricultural accidents. When the contracted households entered the granary of the combine harvester and unloaded food, resulting in disability of the human leg, a small wheel driver drove and drowned and died. The basic reason is that driving is not enough for the staff to learn about agricultural laws and regulations, and the safety awareness is not strong. There is also the phenomenon of non-driving of black vehicles.

Since the spring of this year, our group has stipulated that all tractors participating in operations in the future must be fully qualified for the annual inspection. No unit individual may use a locomotive that is unlicensed, unlicensed, or unlicensed. Otherwise, the consequences are the responsibility of the commander.

In order to effectively eliminate the occurrence of black car non-driving behavior, the team performed inspections on the locomotives, and the 320th agricultural supervision personnel arrived at the company's on-site office to timely handle the settlement procedures for the chain tractors; on May 3 and 31, the The group's large and medium-sized wheeled locomotives and small-wheel locomotives were collectively inspected; the first round of June 15th was a centralized inspection of the whole group of joint-cutting machines during the inspection process. Learn the regulations of the autonomous region on agricultural machinery safety and regulations on safe supervision of combine harvesters, settle new locomotives in a timely manner, and increase the listing rate of locomotives. The number of new locomotives set up this year has already reached two.

At the same time, it also tried to strengthen the management of agricultural machinery, formulated the responsibility of the deputy company commander, and the annual percentage system assessment index of the deputy company commander. He also took the following measures to increase law enforcement. In mid-July, together with the Xinyuan County Agricultural Machinery Supervision Station, the Xiaoer = Gongke police station was jointly inspected to carry out special treatment of non-driving black vehicles. The black car non-driving behavior shall be rectified within a time limit in addition to the provisions of the Autonomous Region Agricultural Machinery Safety Supervision and Management Regulations of the Ministry of Agriculture Combine Harvester and Driver Safety Supervision Regulations in order to eliminate potential safety accident hazards.

Training is strictly in accordance with the tractor driver training program. In late January of this year, a pilot training class was held at the division training center to enhance the practical teaching process in light of the characteristics of adult education so that trainees can truly learn the skills of safe driving. During the joint inspection, some drivers who do not have a license to drive a locomotive are required to take part or all of their tuition fees in advance, and they are required to attend the training class for agricultural machinery training exams.

The machine is mainly a small-wheel homework operation without an invoice certificate. As long as the owner belongs to a team company, the county government or the police station issued a car certificate to prove that it is a non-theft vehicle. After inspection, the license plate can be issued.

4 carry out on-site service. The farm machinery department of the group farms to the remote company to hold a training course for the tractors and carry out examinations, handle household registration procedures, and send cards to the door.

5 Corresponding to scrapped tractors, they must be obliged to scrap and must not be allowed to go on the road or engage in field operations.

In the annual inspection of large and medium-sized tractors, the driver must carry out the first liability insurance. 72 Mission Maintenance Division, Guo Xiaozeng, Cui Guangming, No. 4 farmer group, 89 farms, 14 agricultural workers, An Zhaotian, is driving an iron cattle 55 tractor to cultivator in the cotton field, but the tractor has malfunctioned. He called the group to build a factory. In less than half an hour, the technicians in the factory arrived at the site with tools. In less than 10 minutes, the fault was eliminated and the tractor started to work on the cultivator.

There are 643 medium-sized farm machinery and 390 small-scale agricultural vehicles. The degree of comprehensive mechanization of agriculture has reached more than 95. The maintenance of agricultural machinery has become a common concern of agricultural households. Based on the training of technicians for agricultural machinery repairs and repairs, the group set up a mobile agricultural clinic consisting of 35 key technicians to provide services to agricultural machinery users in the field. The repair factory opened a repair service hotline. As long as the farmer dials the phone and speaks about the location and basic situation of the agricultural machinery failure, the mobile agricultural clinic will arrive in time to help troubleshoot and is welcomed by the farmers.

In order to better improve the service quality of locomotive operations and the service personnel's sense of service, 83 regiments deducted the salaries of 30 crewmembers during last year's cash flow as a deposit for mechanical service operations. The chairman of the company's trade unions is the team leader. Party and government leaders supervise the deputy team leader and receive complaints from the workers and staff. The wages of the locomotive group 30 without complaints from employees were fully cashed, and the locomotive group with complaints from employees was deducted proportionally from the wages of the party's political and political leaders after verification. The staff members were well-received or were awarded double prizes by advanced divisions such as divisions and divisions for advanced locomotive teams. Even Shi. 83 regiment publicity section Zhang Xi'an

CNC Cutting machine

Steel Fabrication Equipment mainly included:

cnc beam line,

Beam cutting saw,

Gantry drilling machine,

...


Those machines are used for cutting, sawing, drilling holes, punching holes shaped profile, like C Channel, H beam, I beam,



Steel fabrication machinery,Steel Fabrication Equipment, cnc beam drilling machine,beam drill line

Shandong EN FIN CNC Machinery Co., Ltd , https://www.shuofangcn.com