The use of booster cylinders is now more widespread. However, what should you pay attention to during the use of the booster cylinder? What environment should the booster cylinder work in? Let Dalan Hydraulics share it!
Since the operating speed of the gas-liquid booster cylinder is limited, its working temperature should be controlled between -5 °C and 60 °C, and it should be operated according to the operation method.
In the work, we must ensure that the booster cylinder can operate normally. The following three points should be noted:
1. Pay attention to the working environment of the booster cylinder when using.
The temperature in the working environment of the 1 cylinder is fixed. If the working environment needs to be changed due to work, the technician of the booster cylinder should be contacted if the temperature exceeds the temperature.
2Because the department components in the cylinder are made of iron, please do not use them in an environment with a complicated environment (such as a chemical contact environment), and install an effective air treatment component at the front end of the cylinder. (Three-point combination) Lubrication and drainage treatment when connected.
2, use within the normal pressure range
When the cylinder is in normal use, the working air pressure must work within the working pressure range specified in the maintenance lecture, and must not exceed the specified working pressure. The above is a brief analysis of some related characteristics of the gas-liquid booster cylinder, and can also be understood from other different angles.
3. Ensure the cleanliness of the booster cylinder
1 Before connecting the booster cylinder to the gas path, please remove the dust and other debris in the pipeline and components to avoid reducing the service life of the booster cylinder.
2 Do not tamper with other hydraulic oil. The hydraulic oil medium selected for the booster cylinder is VG68# anti-wear hydraulic oil. It is irrevocably and self-changing to other liquid media.
----- Editor-in-Chief: Dalan Oil Pump Motor 02-Procurement Consultant
Copyright http: / (Dalan Motor) Reprint, please indicate the source
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Laser Cutting Decorative Panel
Laser Cutting Decorative Panel
|
Product Type
|
Room Divider,Partition Screen, Laser Cut Screen,Sliding/ Folding Screen ,Wall Panel Screen
|
|||
|
Finish
|
Powder coated/ wood color
|
|||
|
Fabricating Method
|
Laser cutting hollow-out, Cutting, Welding, Hand Polishing
|
|||
|
Pattern
|
Customized Design available
|
|||
|
Application
|
Decorative Living Room, Hotel, Bar, etc. Indoor and outdoor public space backdrop Elevator cabin, handrail,living room, background
wall, ceiling, Kitchen equipment Specially for bar,club,hotel,bath center,villa,shopping mall. |
|||
Specifications
(1)Easy to install
(1)Easy to install
(2)Up and down can add color light will improve the performance
(3)Good whiteness,transparency, refractivity and hardness
(4)No pollution or radiation to the environment
(5)Standard: High-quality;
(3)Good whiteness,transparency, refractivity and hardness
(4)No pollution or radiation to the environment
(5)Standard: High-quality;
(6)Characteristics: strong, stylish, durable, corrosion-resistant.
Laser Cutting Decorative Panel,Decorative Steel Privacy Panel,Metal Laser Cut Panels For Cladding,Metal Laser Cut Panels For Garden
HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayimesh.com