After the Spring Festival, everything is recovering, and everything is on the right track. For many people who have renovated in the new year, the project of returning to work after the year cannot be ignored. Under normal circumstances, the process of cross-year renovation is divided into the design has not been started, the end of carpentry, the end of the oil bricklayer and finishing. The process is different, and the places to pay attention to when returning to work are also different. Following Xiaobian together to understand the progress of home improvement projects to different processes, how to resume work.
Before resuming work after the holiday, we must first determine the progress of the project, which projects have been completed, and which projects have not yet done. This mainly depends on the schedule of the project. The progress record of the general record form project progress bar is marked with the words “starting workâ€, “foundationâ€, “consumptionâ€, and “completed†at the back of each type of work. The owner shall confirm the project based on the completion of the previous year and the project manager’s introduction. Progress, re-familiar with some unfinished projects.
1, the design has been scheduled to restart the construction of the resumption of work
The alternatives for the New Year's Eve decoration are still very flexible. Many decoration companies have launched contracts signed before the end of the year in order to attract customers. The projects are scheduled to be well designed. The project started after the year is welcomed by many owners. The time for such renovations will change from winter to spring, so this time the decoration needs to focus on how the spring renovation will be carried out.
Rework focus: Reasonable distribution process to avoid the impact of spring moisture
The weather is wet in the spring, especially in the south. In the home improvement project, the most likely to be affected by wet weather is the woodwork and paint. However, wet weather has little effect on other processes such as hydropower and muddy water. Therefore, the owners who had not started the design were able to arrange to do masonry and layout of hydropower in March. In April, the weather was warmer and then putty, wall paint and carpentry. The paint process is basically in the finishing stage of the decoration, as long as it avoids construction on rainy days.
2. Work stoppages in the woodworking project
If the woodworking was completed before the end of the year, the focus of the post-holiday resumption is to check if there is any change in the carpentry work. If it is found that the problem of deformation and cracking needs to be repaired in time. If there is no problem, you can re-polish once and then paint the top; if the carpentry project has not been completed, then the resumption of work will need to ensure that the art of woodworking process before and after the Spring Festival convergence, to ensure the quality of decoration.
Decoration construction knowledge construction bottom construction acceptance construction contract
The LED light source (which is often also called a fibre optic projector or fibre optic illuminator) provides the illumination to any fibre optic lighting system. They contain the lamp or LED and any additional control gear to provide special lighting effects.
LED light sources is broadly split into three categories - RGBW units which are suitable for sensory and decorative lighting systems; white light only which are great for illumination inside display cabinets and for architectural lighting systems. Finally we also offer white light models with traditional effect wheels. These are used in the same way as in older halogen or metal halide light sources and provide easily controllable colour change or twinkle effects.
Dmx Light Sources,Fiber Optic Light Engine,Led Light Sources,Fibre Optic Projector
Jiangxi Daishing POF Co.,Ltd , https://www.opticfibrelight.com