1. After the owner first obtains the key, he first checks the house and the house inspection is done without any problems. The water shut-off experiment can be done without any problems and the water and electricity reform before the renovation can be done.
2. First find the cabinet manufacturer to make a reasonable design of the cabinet and design drawings. After the owner approves the outlet circuit drawing or requires the cabinet designer to directly paint the wall on the wall to be remodeled, and wait for the modification after confirmation.
3. During the preparation period, it is necessary for the owner to simulate the layout of the living room to arrange the position of the room furniture in order to better define the circuit location, so as to reduce the use of electrical appliances in the future.
4. During the preparation period, confirm what is provided with hot water? These are residential heating, electric water heaters, gas water heaters, and collector-type water heaters.
1) If the district heating is relatively easy to use, other heating methods may not be selected, then no other considerations will be taken.
2) The advantages of electric water heater are: suitable for close water supply, hand basin, shower out of hot water, the disadvantage is that hot water is not suitable for long-distance water supply, more waste of hot water, water heater and hot water is limited, does not apply to the bathtub Water and water heaters can't be powered off for a long period of time. If there is a power outage, the water heater will have to be heated to go home, and it will be relatively large. It will take up more space. It is suitable for large bathrooms and is not suitable for small bathrooms.
3) The advantage of gas hot water is that it is suitable for hot water in a bathtub over long distances. Even if it is used, it is very convenient. Disadvantages are: the use of hot water basin, face wash, hot water came over, it is recommended to install the kitchen basin treasure, if the kitchen and toilet adjacent to that much simpler, do not have to install kitchen treasures in the kitchen and bathroom.
4) The advantages of collector-type water heaters are: the use of bathroom space is reduced, and better when used. The disadvantage is that it requires a high-power power supply. It must not be less than 4mm BV line from the total box, but also depends on the capacity of the meter is not enough, and the power consumption is relatively large. Check the bathtub, shower room, washing machine, and toilet size. Electric water heaters should allow manufacturers to confirm inlet and outlet and power supply locations. During this period, if the room is designed by a designer, a drawing is needed to determine the construction plan. If there is no floor, the ground line must be leveled or the floor with the keel can be routed. If there is no way, there is no way to get away from the plaster line. The disadvantage is that the curved lines tend to become dead lines. If all of the above are not available, it is necessary to reduce the number of remodeling lines and slot outside the pipeline area.
Hydroelectric renovation space electric water heater room decoration design gas water heater kitchen cabinet door bathroom design small bathroom design bathroom size bathroom design drawing
About high speed Door Accessories:
1.Driving system: High Speed Door Servo System motor and control, motor SNMA / SEJ +reducer+flang+encoder+control box
2.Other accessories: Middle aluminium bar, bottom aluminium bar, aluminium vertical track, stainless steel vertical track, brushes,round nylon strip, PVC roll, rolling steel tube complete, drum be;;s for rolling tube, side end covers, stainless steel cover, steel tubes, air bag sensor system, safety light beam, Microwave sensor 24 Gigahertz,PVC welding machine, smoke and fire sensors, PVC transparent window, magnetic loop, photocell, remote control, manual push button, sound warning alarm Led lamp traffic light
For some main accessories, here is detain introduction:
1).24G radar sensor:
Brand: Hofic
Technology: Microwave processor
Maintain time: 0.5s
Protection: IP54
Transmitting frequency: 24.125GHz
Maximum installation height: <5meter
Transmitting power density: <5mw/cm2
Power consumption: <1W(VA)
Installation angle: 0-90°(lengthways) -30-30°(crosswise)
Supply voltage: AC&DC 12V-30V
2).Photocell:
Approval CE & ISO9001
Power supply AC/DC 12-30V
Static current 25A
Action current 40mA
Mounting distance Max 10m
NO or NC contact Done by NO./NC. contact selection
Working environment temperature -42℃ to +45℃
Working environment humidity 10 to 90%RH
Appearance dimensions( controller) 123*50*32mm(L*W*H)
Appearance dimensions(Magic eye head) 19*13mm(L*D)
3). Remote control
Operating Voltage: AC220V/50HZ+-20%
Transmit power:≤100mW;Super regenerative module, strong anti-interference
Operating temperature:-30℃-+70℃
Working frequency: 433MHZ;transmitter 1527, millions of encoding chip
Accept sensitivity:≤110dB
Manipulation method: electric remote control
Configure the quantity: Wireless number; factory configuration transmitter two. Can be equipped with PT2272 digital decoder chip
Configure the function: Up, down, stop, anti-lock full-featured reproduction
4). Magnetic loop
Voltage: 12V AC/DC +-10% 24V 115V AC+-10% 230V
Power: <2VA
Continued electrical output: 7A / 250V AC
Frequency range: 20 to 200K Hz
Response time: infinity (factory setting) or adjust maintain time
Sensitivity: 0.01% to 0.1% divided into 3 levels
Protection level: IP30
Electromagnetic compatibility (EMC) Complies with EM50081-1 and EN50082-2
Detection loop inductance: the limit of 40uH to 100uH ideal value 80uH to 300uH
Operating temperature: -25 ℃ to 70 ℃
Storage temperature: -40 ℃ to 85 ℃
Relative humidity: <90% non-condensing
Temperature compensation: automatic compensation up to 50 ℃ / h
Connection type: 11 pin DIN rail socket
Dimensions: 41 * 78 * 85 mm (width * height * length)
Weight: 250 grams
5). manual push button
This exit switch button is made of ABS and has built-in indicator light make it looks more elegant and fashionbale. It can be widely used in public entrance gates, public door, home, office, hotel, etc.
Door Exit Button Push To Exit Switch Door Opener For Access Control Security
Main Feature
Fashionable appearance
Made of ABS Plastic
Easy to install and operate
Used for access control
Specification
Mechanical Life: 500,000 test
Material: Plastic
6). Limit switch encoder
Voltage: DC5V-24V
Output voltage: high voltage≥85%Vcc, low voltage≤0.5V
Maximum mechanical speed:6000rpm
Anti-vibration: 50m/s,10-200HZ,XYZeach way 2 times.
Current consumption:≤30mA
Response frequency: 0-100KHZ
Protection: waterproof,oil proof,dust prevention, IP54
The output code system: binary code
Operating life: MTBF≥30000(+25℃,2000rpm)
Rotational inertia:4.0x10-8kgm²
Maximum load:radial direction20N
Axial direction:10N
Weight: about 0.4kg
High Speed Door Accessories,High Speed Door,Electronic High Speed Door Accessories
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.selfrepairinghighspeeddoor.com