1. Product specifications are special. The thickness is 8~50mm, the width is 150-625mm, the length is 5-15m, and the product specification is relatively dense, which can meet the needs of users. Instead of the middle plate, without cutting, it can be directly welded.
2. The surface of the product is smooth. The high-pressure water descaling process is used twice in the process to ensure the smooth surface of the steel.
3. The sides are vertical and the angle is clear. The two-way vertical rolling in the finish rolling ensures that the sides are perpendicular to the sides, the corners are clear, and the surface quality of the edges is good.
4. The scale of the product is accurate, three points difference, the same level difference is better than the steel plate standard; the product is straight and the plate type is good. The finishing rolling adopts the continuous rolling process, and the automatic looper automatic control ensures that the steel is not pulled without steel. The dimensional accuracy of the product is high, the tolerance range, three-point difference, the same strip, the boring curve and other parameters are superior to the middle plate, and the plate type is straight. Good. Cold shear cutting, high length precision.
5. The material of the product adopts the national standard and is the same as the steel plate. The quality technical standards are organized according to the YB/T4212-2010 standard (Q345B/Q235B refer to GB/T1591-94 and GB/T700-88 standards respectively)
Sealand is a trustworthy supplier of Mass Flow Transmitter, Mass Flow Sensor, Mass Flow Metre, Coriolis Metre, ATEX, IECEx & CE approved.
Sealand Mass flow meter measures the mass based on Coriolis effort. The operating principle involves inducing a vibration of the tube through which the fluid passes. The vibration, though not completely circular, provides the rotating reference frame that gives rise to the Coriolis effect. While specific methods vary according to the design of the flow meter, sensors monitor and analyze changes in frequency, phase shift & amplitude of the vibrating flow tubes. The changes observed represent the mass flow rate and density of the fluid.
Features
â— Measurement is not influenced by flow density, viscosity, temperature & pressure;
â— Low requirement of straight pipe, because nothing inside holds back the flow;
â— Low power dissipation; stable zero point; better accuracy;
â— Meter is ARM system with 3 calculators to count density, temperature & mass flow rate;
â— Transmitter is assembled by surface mounting technology with self-inspection function;
â— ATEX approved(excluding Transmitter F210). Cert. No. TPS 18 ATEX 04516 001 X
Mass Flow Transmitter, Mass Flow Sensor, Mass Flow Metre, Coriolis Metre
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com