First, the most common cylinder cylinder is blocked. This is generally due to improper use. It is required to discharge water to the air compressor frequently (some air compressors do not need to be drained), and there are A filtered bottle, where the water is also to be drained, or else it will enter the cylinder. Mud treatment equipment
Second, the correct selection of filter cloth, that is, to consider the clarity of the filtrate must also consider the filtration efficiency. The filter cloth must be cleaned once at the end of each work so that no residue remains on the surface. The filter cloth becomes hard and softened. If it is damaged, it should be repaired or replaced in time. Stone sewage treatment
3. Check the sealing surface of the filter plate and remove the residue on the sealing surface to avoid leakage and leakage during operation. Pay attention to the protective sealing surface, do not collide, stand upright when placed, and reduce deformation.
Fourth, the common problem with the filter belt is that the tearing or clogging of the filter belt is mostly caused by uneven force. So pay attention to the machine's correction system. If there is a problem with the correction, the filter cloth will go to the normal machine, and the life of the filter cloth will be almost the same. As for clogging, it requires frequent washing. One is to ensure a clean flushing water, and the other is to ensure sufficient flushing water pressure, preferably after washing the machine for another 5-10 minutes. Decanter centrifuge: http://
Fifth, the bearing is mainly dewatered by the extrusion of the roller. Therefore, the bearing is subjected to a large pressure, so the bearing is also a common wearing part. This requires us to pay attention to the thickness of the mud cake during mud removal. Under normal circumstances, the thickness of the mud cake of 3-5mm is the best result. Don't be too thick and hurt the bearing.
Http://news.chinawj.com.cn Submission:
Stainless Steel Adjustable Clamp,Hose Clamps,Pipe Clamp
Cixi Chengtuo Hardware Parts Factory , https://www.ibccoupling.com