Geological pipe commonly used material Liaocheng Kunlian Steel Pipe provided

Geological pipe commonly used materials Liaocheng Kunlian steel pipe to provide geological materials commonly used in the following geological pipe DZ45 45MnB, 50Mn; DZ50 40Mn2, 40Mn2Si; DZ55 40Mn2Mo, 40MnVB; DZ60 40MnMoB, DZ65 27MnMoVB, etc.; R780 (36Mn2V), R780 (42MnMo7), L80 (30CrMnSiA), N80 (45MnMoB) and several other geometallurgical pipes for drill pipe are high in toughness, bending resistance and strength.

The above information is provided by Kunlian Liancheng Steel Pipe in Shandong Province. The true and false are self-identifying. Our factory is not responsible for it. For more information, please visit:

Gas Industry Mass Flow Meter

Sealand is a trustworthy manufacturer of Gas Mass Flow Meter, Gas Mass Flowmeter, Gas Flow Meter, Gas Flowmeter, Gas Meter, ATEX, IECEx & CE approved.



The installation is as follows.

1. Installation Steps
a) Choose correct installation site, taking installation area, pipeline, transmitter location &

valve location into consideration;
b) Install the meter according to direction mark on sensor; c) Install the sensor & transmitter on pipeline;
d) Connect transmitter & sensor with 9-pin cable;
e) Start.


2. Site selection

a) Sensor stays away from mechanical vibration source, for example, pump. Use flexible pipe to connect meter with pipeline if inevitable. The housing of meter must be standalone, out of touch with any other device. There must be 3 times the size of sensor between 2 sensors if there are many flow meters on the same pipeline, to avoid resonance.

b) Do not install sensor on pipeline that easily expands with hot and contracts with cold, especially near expansion joint, which leads to a worse stability.

c) Sensor stays away from industrial electromagnetic field, such as large generator and transformer, better 5m at least. Such device influences the performance of drive coil and pickoffs. Make sure magnetic field intensity less than 400A/m.

d) Sensor shall be installed on lower pipeline, to be easily full of fluid.
e) Make sure Ex-mark meet application requirements if in hazardous area.

f) Build a sunshade if the meter is under direct solar radiation. g) Keep the meter from corrosive liquid.


Gas Mass Flow Meter, Gas Mass Flowmeter, Gas Flow Meter, Gas Flowmeter, Gas Meter

Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com