There are many kinds of furniture in the furniture market. Solid wood furniture and sheet furniture are two common classifications. When consumers buy furniture, which ones are solid wood and which are plates? It is difficult to distinguish only by the appearance of furniture. Therefore, only by mastering certain purchasing skills can we avoid buying shoddy and flashy furniture. The following Hanmas solid wood furniture will teach you some small tricks to buy solid wood furniture.
Solid wood furniture refers to furniture made of natural wood, and the texture of the wood is generally seen on the surface of the furniture. At present, there are two kinds of solid wood furniture on the market. One is pure solid wood furniture. All the materials of this kind of furniture are solid wood. The other is imitation wood furniture, which is the natural texture, feel and color of wood. They are the same as solid wood furniture, but they are actually furniture made of solid wood and wood-based panels, such as side panels, partitions, etc., which use veneer-coated particleboard or medium-density fiberboard.
First, the purchase points to see the wood grain and ç–¤ knot Han Mas solid wood furniture said: due to different materials, in the home store, the same table, the price of solid wood furniture and sheet furniture is more than a thousand dollars. According to the senior shopping guide of Daming Palace Home Building Materials City, compared with the panel furniture, the special material of solid wood forms the natural color difference, wood knot and texture. When you purchase it, you can identify the solid wood according to the introduction of the merchant. With plates.1. Selection of materials Nowadays, the tree species used in the sale of solid wood furniture are more than ten kinds of trees, such as eucalyptus, teak, maple, eucalyptus, oak, ash, birch, elm, poplar, elm, pine. Among them, eucalyptus, eucalyptus, and ash are the most expensive, and the corresponding prices are also high. In the choice of style, because solid wood furniture is durable, it is more sensible to choose a style that is neither trendy nor outdated.
2, look at the pattern and knots Solid wood furniture has a natural wood texture, a good solid wood board, you see a pattern from the front, open the door, the corresponding position can also see the corresponding pattern. Similarly, pure solid wood boards generally have a scar on the front side and scars on the other side.
Second, the purchase skills: "three look two touch one pressure"
Due to the need of environmental protection, there are fewer and fewer pure solid wood furniture. Most of the solid wood furniture is made by the combination of solid wood and wood-based panels. This process avoids cracking and warping due to the large-area use of solid wood. At the same time of deformation, it not only maintains the beautiful texture of pure natural logs, but also the noble and elegant essence of solid wood furniture. Nanyang Dick furniture sales staff told reporters that because of the different processing technology, the purchase of such solid wood must be "three look two touches and one pressure."
1, "three look"
The first thing to look at is the material. Generally good solid wood furniture, after opening the door and drawer, the wood is dry and white, the texture is clear, the texture is tight and delicate. At the same time, good solid wood furniture requires no irritating odor after opening the door or drawer.
Look at the components. When buying solid wood furniture, you should carefully check the parts of the furniture, such as the sofa legs, columns, and the load-bearing horizontal bars that are close to the ground between the columns to ensure that there are no large knots or cracks or cracks; check the sliding and positioning of the drawer. Open all the doors and drawers to see if the screws at the joints of the components are tight; whether the internal wood-based panels are edge-sealed, and the various accessories are installed with many pieces, no nails, and no nails.
Finally, look at the place of origin. If the moisture content of solid wood furniture is higher than 1% of the average moisture content of the area of ​​use, cracking, deformation, loosening, warping, etc. may occur. Therefore, it is best to buy furniture produced by a brand that has a good dry process.
2, "two touches"
Is to touch the surface is smooth, good solid wood furniture surface is flat, there will be no problems such as protrusions; touch the furniture corners and other parts, if there is rough, pigment coating too thick and so on, it means the processing technology is poor.
3, "one pressure"
When selecting solid wood furniture, it is necessary to lightly press the various points of the furniture, such as the column corner, the drawer or the shelf support, etc., to test whether the test is stable.
related articles
Hanmas Furniture tells you whether the quality of the office chair determines the efficiency of the staff.
Hanmas Furniture tells you the feng shui placed on the desk
Hanmas Furniture tells you what maintenance tips are available in solid wood homes.
Hanmas Furniture analyzes the advantages and disadvantages of all solid wood desks
Silicon Carbide Grinding Wheels
Silicon carbide abrasive is harder than standard aluminium oxide with a very sharp abrasive grain. It is a versatile material, recommended for grinding relatively soft metals such as aluminium or cast iron but can also be used on extremely hard materials such as cemented carbide. Silicon carbide abrasive wheels are also widely used on non-metal workpieces, such as ceramics, stones.
Silicon Carbide Grinding Wheels are
ideal for small job shops and numerous general-purpose applications. Made of
premium green silicon carbide, these superb wheels get the job done -
effectively and efficiently! These super-hard, precision accessories minimize
material loss and maximize grinding-assembly performance, thus maintaining your
valuable tools in optimum condition. And they are conveniently designed to fit
most stationary bench grinders. Reduce effort and increase satisfaction with
these top-notch grinding wheels - perfect for tool and cutter grinding of
cemented carbide applications.
Kemei produce and aim on the following types grinding tools, such as aluminum oxide grinding wheel, silicon carbide grinding wheels, mounted points, Diamond Grinding Wheels, CBN Grinding Wheels and all types of saw blades and cut off wheels.
If you need any type of grinding tool or professional advice about grinding on your workpieces. Don`t hesitate to contact us!
Silicon Carbide Grinding Wheels,Grinding Points And Wheel,Brass Special Grinding Wheel,Rubber Special Grinding Wheel
Henan Jinlun Superhard Material Co., Ltd , https://www.jinlunsuperhard.com