In home decoration, if you want to save the tiles and reduce the cost, it is recommended to consider the following points:
1, find a designer, select the appropriate specifications, draw a row of bricks. Calculate the number of tiles according to the figure, plus the normal construction loss.
2. Select varieties that do not require high levels of “fight for colors†and “fight patterns†so that the cut half (or edge) can be used elsewhere.
3, adjust the plane, facade design, to avoid the riser tube, a small corner that must be cut, easy to damage the waste of tiles.
4. Clever use of waist line, other specifications tile mosaic color, floor circle line, vertical decoration line, bathroom wall mirror size and other aspects of the design, rich effect at the same time, to avoid or reduce the cut tile.
5, master the home improvement "small blocks of brick, large blocks of fees" principle. Combined with the design effect, reasonable selection of small specifications. Wall tiles generally small bathroom, not more than about 200 as well, the general living room, not more than about 600 as well.
6. Select high-quality ceramic tiles and high-tech workers to reduce unnecessary wear and tear during construction and cutting. Although the unit price is slightly higher, it still saves in the overall calculation.
Tile Paving Money Saving Decoration è¯€çª Villa Design Decoration Design Home Decoration Home Decoration Decoration Living Room Bathroom Design Bathroom Wall Tiles Bathroom Tiles Small Bathroom Design Toilet Size Tile Specifications
Sanding Belt Converting Line
1.Abrasive Roll Slitter-Would slit coated abrasive from wide rolls into narrower rolls.
2.Abrasive Cut to Length Machine-To cut down certain length of abrasive material from abrasive rolls
3.Sanding Belt Skiving Machine-to make the abrasive belt joint processing
4.Joint Press Machine-To make the sanding belt joint firmly joint together after it`s applied glue & splicing tapes
5.Belt Slitter-slit wide sanding belt into narrow ones
6.Tensile Strength Test Machine-To test joint strength For each kind of converting machines, we have several models.
The roll slitter machine type is designed to cut rolls of abrasive paper and cloth and to rewind them with grain both inside and outside.
This is a high-performance machine which is suitable for the continuous process of heavy jumbos.Slitting machine is a high-precision, high-sensitivity slitting equipment. The rewinding and unwinding uses an air shaft, and the tension is controlled by a magnetic powder clutch. The unwinding correction adopts ultrasonic automatic correction control, which can realize automatic detection, automatic correction, and automatic meter counting. The slitting is accurate, the slitting speed is fast, and the operation and maintenance are convenient.
Slitting machine is suitable for slitting and rewinding of roll paper, non-woven fabrics, melt blown fabrics, hot-air cotton, films (PET, PE, PI), stickers, labels and other materials.
This machine is mainly for small belt slitting, with fix knife sets, precise slitting. Need to change knife sets when slit different size of sanding belt. 3 sizes available.
We distributes and wholesales various brands of Bonded Abrasives , Abrasive Sanding Disc, Cutting Wheels , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.
Abrasive Belt Making Machine,abrasive slitter,Abresive Belt Slitting Machine,Jumbo Roll Slitting Machine,Abrasive Roll Slitting Machine
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com