Home life dust prevention strategy

The quality of life is increasing day by day, but the dust and dust in the air also increase. From furniture to furniture hardware accessories, dust is a problem that must be solved in home life, but even if you do a lot of work, you can't completely solve it. If you live on the side of the road, it is even more difficult to resist. In addition to diligent cleaning, in fact, the small skills in life will double the effect of dust prevention.

Let the room moist

If the room is damp, the dust will be much less, you can sprinkle water, you can buy a humidifier to remove dust. The dust usually comes from the outside, and the wind that people bring into the house is scraped in from the gap between the door and the window. The gap between the door and the window will be much less. At a fixed time every day, the time when the dust is flying less is 9:00 am~ 10:00, between 2:00 pm and 4:00 pm, choose to open the window for 20 minutes, then close the door and window. Into the house to change shoes, change clothes, do not bring the dust outside into the house. If it is not a wooden floor, you can sprinkle some water in the room. If it is a wooden floor, put a basin of water in the room to keep the air moist, and the flying dust will not be raging everywhere.

Clever use of the principle of static electricity

Floating ash, if used with a brush, will make it fly around, which not only pollutes the indoor air, but also is detrimental to human health. At this time, the old acrylic clothing can be washed and dried. When it needs to be dusted, it can be quickly wiped in one direction. Because of the strong static electricity, the floating dust will be adsorbed on it, just like dry cleaning once, the effect is excellent, saving time and effort. After using it a few times, it can be reused after being washed and dried.

If the sofa in the home is suede, soak the towel, wring it out, spread it on the sofa, and then gently pat it with a wooden stick. The dust will be absorbed on the wet towel. Do not wash once, you can wash the towels, you can repeat the fight.

Using static electricity can help you to remove dust. If you don't use static electricity, if you use it improperly, it may make your home fly dusty. Therefore, it is better for household appliances not to stand by, because the electrical standby will bring unnecessary power consumption. A large amount of electrostatically absorbing dust is generated.

With flowers and plants

Weaving plant "dust green blanket"

Plants such as spider mites, rubber trees, clover, and cactus have the ability to be dust-proof, detoxify, and purify the air. While removing dust, it can maintain proper indoor air humidity and eliminate toxic gases such as formaldehyde and carbon monoxide. Therefore, in the living room, these plants can also be planted on balconies and windows to prevent dust.

Configuring the entrance porch also has dust protection

More ventilation is the rule of healthy home, but it is not suitable for window ventilation when there is windy and dusty weather. The window seals are aging and can also put a lot of dust into the room. Doors and windows need to be closed when dust is flying. In addition to the windows, there are also entrance doors, which are also very important dust entrance channels. After entering the door, the entrance is set. In fact, not only can the room beautified, the living function of the living room can be increased, but also the interior can be very effectively passed through the entrance hall. Dustproof effect.

Choosing the curtain of the curtain

Screens and gauze curtains are also good dust-proof tools. Window-mounted windows must have screens. Cotton-thick curtains can provide good dust, sound and temperature insulation. In an open cloakroom or closet, if a sliding door is not installed, a drape can be used to protect against dust. Do not stack too much debris beside the dusty windows, keep them clean at all times, and keep them clean.

Precision Turned Parts

Precision turned parts are mainly in six axle lathe with sticks of metal materials finished, such as variety of high precision and quality of electronic, computer precise components, communication components, automotive parts and accessories, machinery parts, sanitation hardware parts, optics precise parts, medical appliances, pneumatic tools accessories. We are very strict with our precision turned parts through the finished production is continuously improvement and growth, we will give you the best quality and services about our precision turned parts.

Precision Turned Parts,Turned Parts,Cnc Turning Parts,Precision Turned Components

Stand Dragon Industrial Co., Ltd. , https://www.standdragontw.com