For the floor tiles, I believe that everyone is very familiar with, but for the price of paving floor tiles, many owners will not be clear. How much is it reasonable to paste floor tiles into a square and floor tiles? The following Xiaobian is simple for everyone to introduce, I hope everyone can refer to!
How much is a floor tile
1. Floor tile price
Floor tile size is generally 300*300, 300*450, 600*600, 800*800, its price is about 45-50 yuan per square meter; there are smaller floor tiles 150*150, 165*165, its price is 60-120 yuan per square meter or so.
2. Accessories price
How much is a floor tile? If the decoration floor tiles are all purchased by the owners themselves, accessories such as cement and river sand will be paid out by the decoration company. Each square meter is also about RMB 42-48. Of course, depending on the specific situation, there will be fluctuations because of the floor tiles. Different specifications require different amounts of excipients.
Labor cost
In the decoration, looking for a decoration company to help, it is divided into all-inclusive, half-package, then all-inclusive words by the decoration side bear artificial + accessories + floor tiles, that is certainly a very high cost, the current general price needs at least 62 yuan Depending on the quality of the materials used and grades.
How to paste the floor tile is reasonable
1. Install the drawing design requirements of the house, match the color, pattern, etc. of the floor tile, try the numbering of the tiles, and then select the defective floor tile so that the following work can be done.
2. After the floor tiles have been purchased, they are also sorted out and classified, but remember that after they are sorted and arranged, they need to be placed in a safe place to avoid damage.
3. Soak the floor tiles. This is to prevent the floor tiles from absorbing the moisture in the cement, causing it to dry tight and crack.
4. Then wet the ground floor with water so that it can reduce dust during construction and allow the ground to have moisture.
5. After the first four steps have been completed, cement is mixed on the next step. The ratio of cement is 1:5. When affixed to the floor tile, the thickness of the applied cement is 3 or so.
6. After the local tile is plastered, tap it with a plastic hammer to make it more secure and standard, and avoid emptying problems later.
7. The surface of the floor tile surface shall be clean, smooth and solid with a water rag within half an hour after being attached. The width of the patch joint between the floor tiles shall meet the design requirements, and the width of the joint shall not be greater than 2 mm. Unless there are design requirements, antique tiles are additionally considered.
Xiao Bian summary: The above is a small series for everyone on how to paste the floor tile how much a square and floor tiles how to paste is reasonable content, I believe there are serious reading friends, certainly on the price of tile flooring are very understanding of it , I hope the contents of Xiaobian can provide you with help.
Feature:
-High surface finish.-High temperature resistance.
-Reduces production processing cost and saves labor for customers.
-Low power consumption.
BOHONG ND Wire Drawing DIES are semi-finished products made from high quality ND blanks of international standard and designed to meet customer's quality standards according to customer's hole pattern requirements.It can match the product quality of European and American manufacturers.
Nd Semi-Finished Dies,Silver Wire Drawing Dies,Natural Diamond Drawing Dies,Wire Drawing Natural Diamond Dies
Henan Bohong New Material Co., Ltd , https://www.bohongpcd.com