Step1, remove the bracket, prepare the tools and parts: plug, screw, screwdriver, and other necessary tools; check the size of the plug and self-tapping screws according to the predetermined installation position, try the bracket screw and the camera base Whether the screw is suitable, whether the pre-buried pipeline interface is handled properly, whether the test cable is unblocked, and ready to enter the installation procedure.
Step2, take out the camera, carefully install the lens according to the predetermined camera lens model and specifications (the infrared integrated camera does not need to install the lens), be careful not to touch the lens and CCD (labeled in the figure) by hand to confirm that the fixing is firm. Turn on the power, connect to the host or use the monitor, small TV, etc. to adjust the aperture focal length.
Step3, remove the bracket, plug, screw, screwdriver, hammer, electric drill and other tools, according to the predetermined position, install the bracket. After the check is firm, mount the camera in the agreed direction;
Step4, if you need to install the shield, after the second step, install the shield directly from here. 1. Open the upper cover and the tailgate of the shield; 2. Pull out the fixed metal piece to fix the camera; 3. Install the power adapter into the shield; 4. Reset the upper cover and the tailgate to straighten out the cable. , fixed, mounted on the bracket.
Step5, insert the soldered video cable BNC plug into the socket of the video cable, and confirm that it is firmly fixed.
Step6: Insert the power adapter's power output plug into the power socket of the surveillance camera and confirm the fastness.
Step7, connect the other end of the cable to the control panel or monitor (TV) to ensure it is secure.
Step8, turn on the monitoring host and camera power, adjust the camera angle to the predetermined range through the monitor.
Garden Lights,Garden Lights Outdoor,Garden Lights Solar
China Searun Solar Solution Co., Ltd. , https://www.searunsolar.com