china faucet factory flexible hose for UPC kitchen faucet
 Â
Â
Technical Databse
| Material  | Brass body + zinc lever |
| Finish |
Chrome plated Antique Bronze, Brushed Nicked, Gold etc. available |
| Handle | Single levers |
| Cartridge |
- 35/40mm ceramic cartridge - 500,000 life cycles - Sedal, Keros, SCC, Kone, Hain-Yo, KCG etc. available |
| Water Pressure Testing | 1.3 Mpa |
| Configuration | 1 hole installation |
| Fittings | Brass or Stainless Steel Fittings |
| Warranty | 5 years |
| Certification | ISO9001, CE and ACS approved |
| OEM&ODM Service | Provided |
Â
Â
Â
Â
QA/QC Introduction:
We were established in 1989 as a developer and manufacturer of faucets and bathroom accessories. Over decades, our main products series have been expanded to basin faucet, bathtub faucet, kitchen faucet, shower faucet and stainless steel hose, totally for almost 40 series. We persist in our mission statement of "To Provide the Highest Quality Products with the Lowest Total Cost that Meet or Exceed Our Customers' Requirements in a Timely Manner". The sequential QA and QC procedures are as follows:Â
1) Material inspection
2) Chemical examination lab
A system to test and control compositions of original materials:Â
1) A test and validation program was developed whereby all of our products are sampled and inspected. The results are submitted for comparison with test results.
2) Establish a procedure to check products at all stages of the manufacturing process from raw materials, in-process materials and validated or tested materials to finished goods. Besides, we have also developed a procedure which identifies the inspection and test status of all items at all stages of the manufacturing processÂ
3) There is a system that tracks in-process defects and other non-conformances. These records are used to analyze root causes and solve the problemsÂ
4) We have established a quality manual, which is maintained as means to ensure that products conform to specified requirements
5) 100% inspection in assembly lines: all controls, inspections, equipment, fixtures, total production resources and skills are inspected to consistently achieve the required quality levels
Tel:86-577-85227866
Mobile: 0086 13958853332
CBN is a man-made Superabrasive that outperforms Diamond when used for Ferrous grinding operations.
CBN derives its name from its chemical makeup, of the cubic form of boron nitride (CBN). It has a very desirable characteristic that is sought after when working with difficult to grind (DTG) materials.
Due to its high thermal stability and chemical resistance, the CBN grinding wheel is most suitable for grinding hard ferrous materials, hardened steel, bearing steel, nickel based alloys. machining ferrous materials.
CBN Grinding Wheels are used to sharpen, cut, or remove metal from hard surfaces. Use these wheels when you need a good consistent finish.
Most notably CBN wheels are used to cut HSS metals, like wood tools, blades, bits, and cutters. This type of steel is better than the older high-carbon steel because it can withstand higher temperatures. When you`re tools become dull over time from use, a CBN wheel will bring them back to its sharp use.
Kemei produce CBN(cubic boron nitride)grinding wheels, which can be resin bonded CBN wheel, metal bonded CBN wheels and electroplated Diamond Grinding Wheels. For same steel parts, you can choose all three types CBN wheels, but there still some difference, if you need more information and the best solutions ,please contact us.
Cbn Grinding Wheels,Cbn Cut Off Wheel,Diamond And Cbn Wheels,Electroplated Cbn Grinding Wheels
Henan Jinlun Superhard Material Co., Ltd , https://www.jlsuperhard.com