The international market for die-cast aluminum radiators is mainly in Europe and Central Asia, especially Italy, Portugal, Spain, Poland, Ukraine, Russia, Turkey and other countries. According to statistics of relevant agencies, in 2006, the total sales volume of European radiators was around 700 million, of which 50% were steel plate radiators, while aluminum radiators accounted for only about 20%, which was about 140 million.
Italy, Portugal, and Spain are traditional aluminum radiator sales markets, with a high market share, but sales growth is slow, sales channels are stable, and new brands are difficult to expand the market.
Eastern Europe and Central Asia is a rapidly growing aluminum radiator market, but due to the influence of traditional heating networks and customs, its market share is not high and prices are very competitive.
In China, various aluminum radiators have been sold for some time, but due to alkali corrosion, they are not compatible with existing heating networks. Pure aluminum radiators have little sales, while copper and aluminum composites and steel and aluminum composites. There is a small market for radiators.
The production of die-casting aluminum radiators in foreign countries is mainly in Italy. There are about 20, of which the two are more famous Fondital and Ferroli. The total sales volume of the two companies is about 70 million each year, accounting for about 50% of the market share. They are generally large group companies that produce aluminum alloy raw materials themselves and produce a series of aluminum alloy products, among which aluminum alloy building materials including aluminum radiators are one of their end products. They have a high degree of automated manufacturing equipment, well-known brands and stable sales channels, and the price is not high. According to our understanding, their selling price in Eastern Europe is only 10%-25% higher than that of our country's similar products. So their aluminum radiator is very competitive.
In terms of technology and technology, there are many manufacturers of die-casting aluminum radiators in China, and the levels vary widely. However, the common problems are unstable aluminum alloy materials, large mold differences, insufficient tonnage of die casting machines, and low degree of automation. Low level of thread processing, poor flat seal material, unreliable flat seal, and unfriendly environmental protection before painting. In order to better participate in the competition in the international market, we must increase investment in technology and equipment, and quickly improve our product quality and improve product reliability. We must not blindly reduce prices and engage in low-cost and vicious competition. As a result, product quality does not rise and we fall short. Because I said above that our products have a price advantage of only 10% to 25% compared with foreign brands, so we continue to cut prices and have little effect on foreign brand products. We can only make comparisons between us and kill each other. In addition, the die-casting aluminum radiator is an important building material and has high quality requirements. Once a quality problem arises, it will be accompanied by high claims and will be eliminated by the market.
Today, all of us here are aluminum die-casting manufacturers with a certain amount of domestic production. We must conscientiously study, understand, discuss and form more advanced product standards under the guidance and coordination of the leaders and experts of industry associations. Strict control of product quality, so that companies and industries together to obtain healthy and rapid development.
Floor Lamp
Floor lamp is an indispensable part of home decoration. Floor lamps are often used for local lighting, not comprehensive, but emphasize the convenience of movement, which is very practical for creating a corner atmosphere. If the lighting method of the floor lamp is direct downward projection, it is suitable for activities that require concentration such as reading. If it is indirect lighting, the overall light change can be adjusted. The shade of the floor lamp is required to be concise, elegant and highly decorative. Cylindrical shade are more popular, and lantern-shaped are also more commonly used. And the material of shade usually is crystal, cloth, pvc and etc. And the body of lamp often is made of metal , wood, stone and so on. Nowadays, the floor lamp is not only the function of lighting, but also many people regard it as an ornament. With the development of technology, there are more and more emerging materials on the market, so it is a very good choice to use the artistic floor lamp as an ornament.
Lavius - master of lamp and chandelier manufacturers and suppliers in China, We have 13 years of experience to produce lamp. We also produce Custom Chandelier, Hotel Chandelier, Lobby Chandelier, large chandelier, Table Lamp, Wall Lamp ,and floor lamp. So we are confident to provide good service for every customer. If you are interested is us, please visit our website and contact with us. Looking forward to working with you.
Floor lamp,Floor Lamps standing,LED Floor lamp Manufacturer and Supplier,metal floor lamp,stainless steel floor lamp
Guangdong Lavius Lighting Co., Ltd. , https://www.lovuslight.com