2, into the wall closet: in the bedroom combination wardrobe is the kind of a wall made of closed wardrobes, the size of the wardrobe can be determined by the length of their own wall.
3, walk-in cloakroom: generally a closed space, only a pile of wardrobes and a place where you can change clothes or pick clothes; if the bedroom area is large enough, you can design a closed hut to put clothes, This formed a walk-in closet. Walk-in cloakrooms are a favorite of women because they have a very large demand for storage space in the room and it is very important to design a limited space rationally. The internal form of the cloakroom can be divided into four types according to the existing spatial pattern: U-shaped arrangement of squares; better arrangement of deep-long parallels; wider and longer-length forms, suitable for L-shaped arrangements.
(1) Cabinet style: The largest in traditional style. "Cabinet style" is the most traditional form of locker room, and it is also the most able to accommodate clothing. All costumes can find their own suitable home. The "cabinet type" locker room is most suitable for families with a large number of clothes. It can store the clothing of all family members in different categories.
(2) structural formula: light and simple and easy access. The “structural†locker room eliminated the side panels of the cabinet and replaced it with a modern metal pillar. Its style is more modern and beautiful, more in line with the aesthetic concept of young people, and it is more convenient to pick and place clothes. However, the locker room has a slightly smaller storage capacity, and its load-bearing capacity is not as good as that of a "cabinet type" locker room. Therefore, the locker room is more suitable for a modest amount of clothing and a relatively small number of two or three families.
(3) Wall-mounted: Avant-garde fashion at a glance. Compared with the first two locker rooms, the "wall-mounted" locker room is much simpler. The partitions where the clothes are placed are directly fixed on the backboard of the locker room, and the backboard is fixed on the wall and the ground. The entire dressing room uses the least amount of sheets and hardware, and the price is relatively cheaper. The biggest feature of this locker room is that you can “keep abreast of†all your clothes as long as you walk into a “walk-in locker roomâ€.
Walk-in cloakroom doors are generally designed as sliding doors. For sliding doors in cloakrooms, the doors are generally single-sided. There is also a double-sided sliding door, in which one side of the door is a front face and a side of the inside of the cloakroom is designed as a mirror. Such two-sided doors have different functions and further enhance the effect of use of a cloakroom. When designing the cabinet, special attention must be paid to the fit of the cabinet structure and the door. First of all, the drawer should have a certain distance. The distance should be determined by the position of the door, so as not to open the door or pull the drawer. Second, the side panels on both sides must have enough fixing plates to hold it. Avoid side plate deformation. For example, a small cabinet for socks and sundries can be designed on the side of the side panel rather than on the inside, so that the side panel can be reinforced.
Technical Parameters:
The wardrobe is divided into bedding areas: the conventional design is at the highest level, and the height is 400?--550?
Gown Zone: Height 1400?--1700?
Tops: Height 1000?--1200?
Stacking area: height 350?--500?
Drawers: 400 to 800 inches in width and 160 to 200 in drawer height
Changing the face of the drawer with glass: The walk-in closet is open, so underwear and commonly used bath towels should be placed in a drawer. Traditional drawer cabinets are wood-faced, while the latest drawers are glass-faced. This type of drawer cabinet is not only more beautiful, but also more convenient to take clothes.
Tie-style (Baipo): Every successful man will have multiple ties, and the tie is lined with non-tie. This tie box occupies less space than a drawer, and the location is not limited, so the owner can "arrange" the layout of the tie lattice.
Pulling the laminates: stacking up the woolen fabrics to put them together can be troublesome. If you use a puller board, you can stack the stacked items, but it also has the disadvantage of less storage space, so ask the owner to choose carefully.
Trousers rack: Stacked trousers will have creases, and trousers trousers can leave no trace of trousers, so the hanging trousers rack in the cloakroom is necessary, it requires no less than 600mm of hanging space, so hanging pants rack is usually It will be placed under the drawer, which will save space.
Dressing mirror: A dressing table is an essential configuration in a walk-in closet. When you change into a beautiful new dress, you must take a photo in front of the mirror. Therefore, it is not necessary to put a dressing mirror on the side of the cabinet. forget. The height of the locker is 1000?--1400? with a width of about 400?.
Cabinet kicking: According to the kick of the room placed in the cabinet, it is generally 5 feet higher than the wall baseboard; in the unknown wall kick height, the cabinet kick height is designed to be 100?.
Sliding doors: Sliding doors are divided into closet doors, partition doors, folding doors, swing doors, closet doors
1, the closet door frame: galvanized steel is relatively large, not easily deformed
2. Pulley: The lower load-bearing wheel bearing of nylon glass fiber has a large weight and strong wear resistance. The following rails are more secure against jumping.
3, pulley identification: repeated push and pull no noise, no astringent, smooth and smooth sliding, moving the door, will not skip.
Partition doors:
1. Frame aluminum-magnesium-titanium alloy has high strength, is not easy to wear, push and pull is relatively light, and can be placed on the kitchen, balcony, bathroom, etc.
2. It is recommended that you install a partition door to install a seal when it is relatively large in wind and sand. This can be used for shock absorption and buffering purposes.
3, the lower pulley of the partition door is built-in type, beautiful and practical
Sliding door routine maintenance
A. Keep track clean.
B. Prevent heavy objects from falling onto the track.
C. Cleaning with non-corrosive cleaning solution
D. If the mirror or board is damaged, please ask professional personnel to replace it
E. For safety reasons, always check if the anti-jumping device is in effect.
F. When it is found that the door is not tight with the wall, professionals are required to adjust the lower pulley screw to achieve the tightness of the door and wall.
Cloakroom Villa Design Space Glass Room Doors Simple Chests of drawers Cabinets Kitchen Doors Doors Glass Doors Doors Glass Cabinets Doors Doors Doors Glass Doors Kitchen Folding Doors Glass Doors Glass Folding Doors Glass Sliding Doors Doors Closet Doors Kitchen Doors Doors Doors Closet closet kitchen sliding door kitchen glass sliding door bathroom design toilet partition bathroom sliding door bathroom folding door bathroom door bedroom closet small bedroom
Manhole Cover,Composite Manhole Cover,Recessed Manhole Cover,Cast Iron Manhole Cover
Zhoushan Runchun Import & Export Co., Ltd. , https://www.en124casting.com