In the daily life, as time goes by, there will be a variety of small problems, or stains or damage, in short, people will not be pleasing to the eye. At this time, you don't need to ask a professional to do it yourself. The trick is as follows:
Paint stains. The paint is dripped on the furniture. If it is not dry, it can be wiped off with a cloth with wax water, or gently wiped with steel wool and wax. If the paint is dry, the linseed oil can be dripped on the paint to make it deteriorate, then wiped off with a cloth, and then polished with gray stone and wax oil.
The paint peeled off. The surface of the varnish furniture can be coated with the same color of advertising paint after peeling off the paint. Then it is applied to the surface with varnish, which is as good as ever.
Fire damage. First remove the fire-burning wood with a blade, then wipe it with steel wool, then fill it with the bakelite of the furniture, smooth the oil, and polish it with furniture wax.
The drawer is worn. The drawers are worn out, and the drawers can be pulled out and turned over. The electric iron is used to iron the candle oil on the drawers to make the oil penetrate into the wood. By using the same method, the candle oil is also applied to the corresponding table on the table cabinet to reduce the wear of the drawer.
Metal furniture derusting. You can use a gauze and a little sewing machine oil to wipe the rust spots, expose the rust and then use the No. 1 fine water sanding paper to remove the rust, use gauze to clean the rust oil, and then mix the paint with the turpentine in a ratio of 2?1?7u3, evenly Apply to the rust.
Electroplating furniture derusting. Small pieces can be placed in pots filled with organic oil to soak and remove rust; large pieces can be applied to the rust with a brush or cotton gauze oil, and then wiped back and forth after a while to remove rust.
The paint is dim. There are two ways to restore the luster of wooden furniture. One is to use a half cup of water and 1/4 cup of vinegar, wipe it with a soft cloth. The second is to wipe the cloth with a soft cloth dampened with alcohol or toilet water or tea, and then wipe the floor wax.
Cracks, holes. There are two kinds of repair methods for cracks and holes in tables, chairs and cabinets. One is to cut the old books into crumbs, add a proper amount of alum and water to make a paste, and embed them in the seams. The second is to mix the wood chips with white glue and evenly insert them into the cracks. After polishing the sandpaper for a day and night, it is simple and economical.
The hinge is loose. You can take a piece of wood that is as fine as chopsticks. Sharpen the white glue and insert it into the screw hole of the wood. After hammering in, break the wooden strip and screw the wood screw in again.
Dosing Pump Characteristic :
1 Clean and pollution-free: fluid only passes through and touches the Peristaltic Pump hose.
2. High precision: constant current, reproducibility of up to 0.5%, and flow can be precisely adjusted.3. Low shear force: It is an ideal tool for conveying shear-sensitive and corrosive fluids.
4. Corrosion resistance: it can transport various fluids, such as organic solvents and corrosive liquids.
5. Idling and dry operation: air or gas-liquid-solid three-phase mixed transportation can also be transported.
6. Possess self-priming ability: self-priming, no need to fill the pump, no need to empty.
7. It has the function of a shut-off valve, does not siphon, has no seals, and has the functions of a shut-off valve and a check valve.
8. Two-way conveying function: reverse pumping and back-suction functions can be realized by changing the direction of the pump runner.
9. Simple maintenance: only need to replace the peristaltic pump hose, no valve and seal replacement.
Dosing Pump,Laboratory Peristaltic Pump,Metering Pump,Peristaltic Dosing Pump
Baoding Chuangrui Precision Pump Co., Ltd. , https://www.chuangruipump.com