Second-hand house decoration is a systematic project. The concept of energy-saving should be reflected in the decoration process. When purchasing a house, it should be considered. From looking at the house, design to construction, and putting in the idea of ​​saving, we will get good results. In particular, some elderly houses with a relatively long age are how to carry out energy-saving renovation and energy-saving renovation. There are many doorways. The first step: bring the experts, choose a set of "foundation thick" house second-hand housing, especially the husband's room, the quality varies widely, generally through the original owner's decoration. Sometimes the decoration will cover the cracked corners, mold, water leaks and other problems. Therefore, when buying a house, it is best to bring a professional decoration supervision, from the facade to the corridor, from the wall, the ground to the doors and windows, the pipeline, carefully observe every detail.
Understand the overall structure of the house, whether the house has the decoration structure of the damaged structure, and the phenomenon that the main structure is damaged due to the selflessness and reconstruction. Pay attention to the workmanship when viewing: whether the wall surface is flat, whether there is moisture or cracking; whether the cornering process of the corner, window edge and ceiling is detailed; whether the drainage system is normal... Some old houses have been difficult to find the drawings when they were renovated. Therefore, it is necessary to communicate with the owners to understand the internal structure of the house, including the direction of the pipeline, the position of the load-bearing wall, etc., to facilitate the renovation. A house with a high quality problem will affect the future renovation project. It is recommended not to buy it. If there are only some small problems that can be solved, please remember to point out to the owner and use it as a bargaining chip when buying a house. Some experts have the "eyes of the fire" to help guide, select a second-hand house with a basic decoration and no quality hazards, which can save a lot of trouble for the future renovation.
The second step: turning waste into treasure, and spending a small amount of money to transform a 100 square meter second-hand house. If the design is reasonable and fully utilized, at least 10,000 yuan can be saved. Where can I use it twice and turn waste into treasure? In fact, the floors, tiles, doors and windows, and even old furniture left by the former owners can be used. If you make the right transformation, you can spend a small amount of money and become a big one. If the floor style and texture of the former owner are good, consider keeping it. During the renovation, the construction workers should lay a few layers of cardboard on the ground to protect them. If you are not satisfied with the original floor, you can also use it as a base, and then cover it with a new floor, which can enhance the moisture-proof effect. If you improve the door and window, you can save a lot of money. The new owner can decorate the original door, or use the original door as a blank door to beautify the style. Kitchen cabinets or some old furniture of better quality are also the object of transformation. Brush it again with paint, or reapply the decorative board on the outside, and spend a little thought and creativity to “degenerate into magicâ€.
The third step: multi-use energy-saving products, "change" out of a green home Many old public houses have not used energy-saving materials when they were built. During the renovation, the energy-saving renovation was just carried out, and the old house was also “greenâ€. Energy-saving renovation can start from the following places: change the original single glass ordinary window into hollow glass window; install an external sunshade device outside the window to reduce the high temperature caused by direct sunlight; apply a layer of thermal insulation mortar on the inner wall; Install a sealing strip on the window.
In addition, curtains with thick fabrics, good insulation and warmth, and sealed security doors can also help keep warm. In the installation of electrical appliances, it is recommended to use energy-saving lamps, solar water heaters, energy-saving air conditioners, energy-saving refrigerators and other products. In the decoration of kitchens and bathrooms, water saving problems should be considered. In addition to the installation of water-saving faucets and water-saving sanitary wares, dry and wet separation is also a major point in water saving in the bathroom. Light tiles and floor tiles can be used in the bathroom, and the matte bricks with porous surface are used less, so the water consumption will be greatly reduced during daily cleaning. Although the purchase of energy-saving products is slightly more expensive than ordinary products, from the monthly electricity bills, water bills, gas bills and other documents, you can really feel the effect of energy saving, while also making a copy for environmental protection. Force, live more comfortable, why not?
Brass knurled thread insert Made of material, good thermal conductivity and heat resistance.
Widely Used On the Injection molding for Tightly Fixing.
Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection.
China leading manufacturers and suppliers of Hex Nut,Hexagonal Nut, and we are specialize in Stainless Steel Nuts,Hex Nut Bolt, etc.
Brass hex nut,hex coupling nut,hex flange nut,hex thin nut,hex bolts and nut
Shenzhen Lanejoy Technology Co.,LTD , https://www.grill-grid.com