Seven Features of Keshun Caster Construction

In order to thank the broad masses of old and new customers for our company's support, Xiaobian and everyone are explaining about the seven characteristics of Keshun's caster structure, to help you better understand our company's product knowledge:
(Features 1) Bracket steering center distance: refers to the horizontal distance from the vertical line of the center rivet to the center of the wheel core.
(Features 2) Installation height: refers to the vertical distance from the ground to the installation position of the equipment. The installation height of the caster refers to the large vertical distance from the bottom plate of the caster and the wheel.
(Feature 3) Turning radius: refers to the horizontal distance from the vertical line of the center rivet to the outer edge of the tire. The proper spacing enables the caster to make a 360-degree turn. The rationality of the turning radius directly affects the service life of the caster.
(Feature 4) Steering: Hard, narrow wheels are easier to turn than soft, wide wheels. The radius of rotation is an important parameter for wheel rotation. Too short a turning radius will increase the difficulty of steering. Excessively large wheel will cause the wheel to shake. And shortened life expectancy.
(Features 5) Driving load: When the caster is moving, the load bearing capacity also weighs the load. The dynamic load of the caster differs depending on the test method of the factory, and varies depending on the material of the wheel. The key is whether the structure and quality of the bracket are Can resist shock and shock.
(Feature 6) Driving flexibility: The factors affecting the mobility of the casters include the structure of the bracket and the selection of the bracket steel, the size of the wheels, the type of the wheels, the bearings, etc. The greater the wheels are, the better the running flexibility is. A narrow wheel is more economical than a flat-edged soft wheel, but a soft wheel on an uneven surface saves effort, but a soft wheel on an uneven surface can better protect equipment and prevent shock.
(Feature 7) Impact load: The momentary load capacity of the caster when the equipment is impacted or vibrated by the load. Static load Static load Static load Static load: The weight that the caster can bear in the static state. The static load should generally be the exercise load ( 5-6 times of dynamic load bearing, static load should be at least 2 times of shock load.
In addition, our company also manufactures Forma casters, horizontal adjustable casters and other products. Through continuous improvement of technology over the years, the company's products have been continuously innovated, has a huge customer base, and is worthy of the trust of the broad masses of old and new customers, and look forward to more Friends cooperation!

Transfer from: