Home life is inseparable from the point of view, switches and sockets as close to our daily lives in the vicinity of electrical appliances, the safety can not be ignored, so under normal circumstances, it is best to find a professional decoration master to install better, but if it is self-installed If it is replaced, the wiring in the switch socket box must be carefully performed, and misconnections and missed connections are not allowed. Today, Xiao Bian has taught us how to install switch sockets. Only qualified switch sockets can ensure the convenience and safety of residential power.
A, switch socket bottom box cleaning
The switch socket is installed after the wood painter and the like, and the bottom box that is placed for a long time is inevitably piled up with a lot of dust. During the installation, the switch socket bottom box is cleaned first, in particular, the dust and impurities in the box are cleaned, and the remaining dust in the box is wiped with a damp cloth. This will prevent special impurities from affecting the use of the circuit.
Second, the power line processing
Leave the wires thrown out of the box for the length of service, and then cut out the core, taking care not to injure the wire core. Wind the wire in a clockwise direction around the corresponding terminal of the switch or socket, then tighten the pressure head, and the wire core must not be exposed.
Switch socket installation switch socket
Right Angle Prisms are used to direct beams at 90 degrees by using hypotenuse face in total internal reflection (TIR). The right angle prisms are often preferable to an inclined mirror in applications involving severe acoustic or inertial loads, because they are easier to mount, and deform much less than mirror in response to external mechanical stress. As long as acceptance angle limitations for TIR from the roof faces are not exceeded, the right angle prisms can serve as a retro reflector, turning beams back to the original direction.
Available in sizes ranging from 3 mm to 60 mm, Right-Angle Prisms can be used to deviate a light path by 90° or 180°, depending on which surface is used as the input for the light source.
Right angle prisms are used to redirect light beams at 90 degrees. Right angle prisms are made of BK7, UVFS optical materials.
- 45-45-90 degree prisms
- Can be used as internal or external reflectors or as retro - reflector
Right Angle Prisms,K9 Glass Right Angle Prisms,Sapphire Right Angle Prism Mirror,Znse Right Angle Prism, Mircro-Prism
Changchun Ruiqi Optoelectronics Co.,Ltd , https://www.ruiqi-optics.com