Taizheng Instruments launched a pneumatic automatic burst strength testing machine in July

Automatic burst strength testing machine features:

1. Adopt advanced microcomputer detection control system and digital signal processing technology to ensure accurate test data

2.LCD liquid crystal display

3. With fast, high-quality micro-printer and complete and detailed test data report

4. With real-time calendar and clock, with power-down protection test data

5. Ability to save power and double-page display the last 99 test records

6. The instrument has a small drawer built in to accommodate various consumables.

Fully automatic burst strength testing machine specification: TZ-101QA

Mode of operation: button operation

Display mode: LCD screen display

Indication error: ±0.5% FS

Indication variability: ≤0.5%

Automatic clamping and loosening device, sample clamping force: >690kPa (adjustable)

Test system tightness: pressure drop <10% Pmax within 1min

Resolution: 1kPa

Exhaust volume: (0.02~0.3) m3 /min

Rated pressure: (0.6~0.7) Mpa

Weight: about 50kg

Hydraulic oil: 85% glycerin, 15% distilled water

Clamp ring material: stainless steel SUS 304#

Clamp ring upper ring: high pressure type Φ 31.50mm

Lower ring: high pressure type Φ 31.50mm

Volume: 44 × 42 × 56cm

Power supply: AC220V±10%, 50Hz 120W

Burden resistance measurement range: 250~5600kPa

Pressurization speed: 170±15ml/min

Standard delivery: one wrench, 1 bottle of special glycerin, 1 bag of calibration film, 1 piece of rubber film

Prints 99 test values ​​(clamping force, minimum, maximum, average, differential pressure, time)