A shower of the sun, planted a yellow scorpion to eat white rice, said the weather is important for the harvest. Now in Heilongjiang, soybeans are flowering and pods, and corn is entering the most vigorous stage of growth. The weather is especially important for agricultural production.
  Now the soil is very good, the soil moisture is also very good, there is no shortage of water, so it needs a good weather, the temperature is up, the grain filling of the whole corn, the soy grain grain period is particularly beneficial.
It turns out that everyone is looking forward to the sun, and indeed, in the past half a month, most of the northeastern rainfall has been more than normal, especially in parts of Jilin and Liaoning, which are one to two times more. It is expected that on August 1st, the entire northeast will finally rain in the sky, on the 2nd, here will continue to be mainly sunny, farmers friends can seize the good weather these two days, to promote the management of precocity and disease prevention; unfortunate It is not a long time for sunny days. It is expected that there will be a rainfall process from the west to the east in the northeast region, and the rain will be fierce. Like No. 4, most of Heilongjiang, Jilin, and Liaoning will experience heavy rains.
In the past two weeks, there have been a lot of rainfall in some places in Jilin and Liaoning. It is because of the rain and rain, and there are floods in many places. In the drinking water basin of Jilin, the river rises very obviously, and the corn next to the river has already Soaked in the water, the farmland and the river are mixed together and become a vast ocean. In the face of heavy rainfall that will occur in the northeast from the 3rd to the 5th, it is necessary to continue to strengthen prevention.
Total 1 | <First <Prev 1 Next> Last> |
share to:
Center Drill Bit is also known as Slocombe Drills, Centre Drills were originally designed to create the countersink required to locate a tailstock centre when turning between centres. They have a point angle of 60° to match the angle of a Tailstock Centre.
A Centre Drill can also be used to provide a start location for a drill when drilling down the centre of a bar held in a Lathe chuck. Centre Drills are short and rigid enough to mark the bar centre without wandering off if they are carefully offered up to a rotating work-piece.
Carbide Center Drills,Hardware Tool Step Drill Bit,Wooden Box Packed Drill,Hss Center Drill Set
Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com