Turntable die fixture

The traditional triangular external thread processing method is to use the die holder to clamp the die thread, which is not only easy to set, but also causes the product to be scrapped, and has high labor intensity and low efficiency. To this end, I designed a turntable die fixture that was machined on a lathe, which worked well. First, the structure of the die fixture structure The die fixture structure is shown in the figure. The sliding bracket 8 and the taper shank bracket 10 are axially slidable, and the shaft 14 is welded integrally with the sliding bracket 8 and has a square shaft on the shaft 14. The corresponding position of the rotary plate jaw clamp 1 matched with the shaft 14 is square-shaped, and when the nut pressing block 2 is loosely hit by the retaining ring 3, the clamp 1 is axially moved by the spring force.

Automatic Sliding Door

Automatic Sliding Doors can either be a single door sliding in one direction or bi-parting doors where each door leaf slides in the opposite direction. They are often used in grocery stores, entrances to shopping malls, hospitals and other applications where you want to provide your customers a hands free, safe and easy access to your building.

Hospitals

Airports

Retail centers

Pharmacies

Hotels

Grocery stores

Hardware stores

Sporting goods stores

And more

In addition, one of the biggest benefits of automatic doors is energy savings. Since these doors only open when someone comes in or out of your building, it prevents the loss of energy when a door may otherwise be left open for a long time.

Hongfa will only dispatch highly trained CE Certified inspector/technicians to inspect, repair, service or replace automatic doors. This ensures we provide the most efficient and safest door repair for your business.

Automatic Sliding Door,Automatic Sliding Glass Door,Sliding Door With Automatic System,Automatic Stacking Sliding Glass Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.selfrepairinghighspeeddoor.com