First, the method of use (first add water when mixing, after adding oil)
1. Before using the cutting fluid, rinse the machine equipment's mailbox with clean water and disinfect it to extend the service life of the cutting fluid. If it used to be oily cutting oil equipment, change the water-based cutting fluid. Before use, be sure to clean the old cutting oil or wipe it with a cloth. If the old oil is not cleaned, the use of the aqueous cutting fluid will be shortened. Life expectancy can lead to odor and other consequences.
2. Adding water-based cutting fluid: Add the order of adding water first and then adding oil. The initial concentration of cutting fluid is preferably higher, such as 5%~8%. If used in central circulation cooling system, it can be added to 1%. Disinfectant, the concentration of cutting fluid should be kept above 5%, and the tank should be filled with fresh cutting fluid to make the concentration reach 5% every 3 days.
3. If the mailbox of the aqueous cutting fluid has oil slick, or if the rail oil falls, it is best to use the oil remover to remove the oil slick.
4. According to the processing volume and the working time of the working fluid, it is necessary to replace the cutting fluid all at once. For example, the CNC machine tool is usually replaced once a month. When replacing the cutting fluid, the most important thing is to rinse the fuel tank with clean water.
Second, the considerations of CNC machining machine tools
1. The water-based cutting fluid is mainly used for cooling and lubrication between the processing tool and the machined workpiece, and has certain anti-rust properties (such as increasing the anti-rust property to increase the concentration of the working fluid)
2. The machine table and knife sleeve of the CNC machine may have rust phenomenon during the process of using the aqueous cutting fluid. To solve or avoid this rust problem, it is necessary to periodically wipe the cloth on several CNC sets and knife sleeves. Waterproof and waterproof rust preventive oil can solve this problem.
Third, always check the working fluid concentration, so that the working fluid is in good use.
Buffing Wheel is made of finely cotton cloth by special technology and is the precision polishing tools of metal and non-metallic workpieces,It is made of mutillayers 100% cotton cloth sewn surround by the center,with a leather lip attached around the inner hole. High quality material, exquisite workmanship, long service life.Specially used for polishing jewelry, ornaments, or precise products.
The layers of cloth edge with pile processing,suitable for metal, jewelry hardware,stainless steel, aluminum products, wood, plastic, ceramic, glass and watch industry grinding and polishing.
Working with polishing wax polishing effect is better.
Treated Buffing Wheels have a special chemical added to the cotton which gives them more aggressive cutting action allowing them to work faster than standard cotton spiral sewn buffing wheels. The chemical treatment also gives these buffs a longer lifespan.
Treated buffing wheels can be used in place of Cotton Spiral Sewn buffing wheels for cutting and coarse buffing.
Features:
-- Suitable for Metal, jewelry, metal, stainless steel, aluminum, wood, plastic.
-- Surface of the ceramic, glass and watches industry grinding and polishing.
-- Use with polishing wax polishing better.
-- Can be stacked onto tapered spindles for required thickness.
We distributes and wholesales various brands of Bonded Abrasives, Abrasive Sanding Disc, Cutting Wheels , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.
Cotton Buffing Wheels,Buffing Wheels,Polishing Wheel,Cut Off Wheels
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com