Because most of the current renovation of its water pipes are buried wall-type installations, the installation of the water pipes should be highly valued during the renovation, so as to avoid problems such as water leakage and bursting of water pipes in the later period. Then, what are the precautions for water pipe installation ? How do we properly install water pipes? The following Xiaobian will give you a detailed explanation.
Water pipe installation precautions
1. Before installing the water pipes, estimate the amount of water pipes to avoid causing problems such as waste caused by buying more materials or missing materials, which may affect the installation process.
2. If the transformation of an old house or the renovation of a second-hand house is required, all the water pipes should be replaced with new ones. Do not feel bad about it, and then do not know where the problem is.
3. Before installing the water pipes, check the water pipes and fittings to see if there are any problems such as leakage or damage. Moreover, the connection of the water pipes and fittings must be very firm.
4. During the renovation, the direction of the water pipes must be determined. Most of the water pipes are now wall-mounted and it is difficult to find any problems. Therefore, it is recommended that the installation of the water pipe is safer when it is installed. Although the cost of retrofitting will be more expensive, for the sake of long-term interests, it will be better to find problems when the water pipe is at the top and easy to repair.
5. When the water pipe is installed, be sure to remember to walk down the water pipe so that it can be easily maintained and overhauled.
How to properly install the water pipe
1. Before installing the water pipe, be sure to choose a good quality, healthy and environmentally friendly product. If it is to install PP-R pipe, it is better to find a professional company to install better. Because if they are installed, their pipes are easy to clog or burst, which will cause unnecessary trouble for later life.
2. There are two methods for laying pipes, one is concealed and the other is surface mounted. Concealed installation is the laying of pipes in the indoor ground, suspended ceilings or trenches. The advantage of concealed installation is that the pipes cannot be seen after laying and are more beautiful. The disadvantage is that the problems in the later period are not good for maintenance and construction is not good. The surface mount is the laying of the water pipe along the wall, columns, beams, under the ceiling, and the floor. Its advantages are lower cost, easier construction and more convenient maintenance. The disadvantage is that the surface of the water pipe tends to accumulate ash, generate condensate, etc., affecting the indoor environment and affecting the appearance.
3. After installing the water pipe, be sure to test whether the water pipe leaks. When testing, close the water main valve, open the indoor faucet, make sure there is no water drop, and then see if the water meter is moving. If there is movement, it will indicate that the water pipe will leak. If the water meter does not move, it means nothing. Water pipe test time is 20-30 minutes.
The article concludes: Regardless of whether the installation of the water pipe is concealed or surface mounted, the water pipes should be installed once. If the decoration staff is required to install it, the owner must supervise the work. After installation, remember to test for leaks. The precautions for installation of the above water pipes and how to correctly install the water pipes can be referred to for reference.
Welded Wire Mesh,Galvanized Wire Mesh,Chicken Poultry Fence,Pvc Welded Wire Mesh Roll
Anping Xinlong Wire Mesh Manufacture Co.,Ltd. , https://www.xinlongfence.com