What are the points that we all need to pay attention to when welding honeycomb inclined tubes
How are the one piece of honeycomb inclined tubes connected together? How was it fixed? What are the points to be aware of when installing the honeycomb inclined tube on site? Zhengda professional technicians provide you with the points to pay attention to when manufacturing honeycomb inclined tube welding, that is, the preparation of the honeycomb inclined tube on site, the operation of the professional welded honeycomb inclined tube, and the safety matters that workers need to pay attention to when welding the honeycomb inclined tube. .
The first point is what needs to be prepared on site when the honeycomb inclined tube is installed.
First, professional cellular inclined tube installation technicians are in place, and guardians must be in place;
Second, we need to prepare the power supply and cable for welding the honeycomb inclined tube;
Third, prepare a 300W soldering iron;
Fourth, the construction site will be freed up in an idle place, because the bulk of the honeycomb inclined pipe after the completion of the hot will occupy a large space;
Next, let's take a look at the operation method of soldering (hot stamping) of honeycomb inclined tubes.
1. Open the honeycomb inclined tube package, place the first inclined tube packing on the ground, take the second inclined tube packing on the first piece of packing, check the incision of the inclined tube packing, and ensure the 60° angle, and It has a hexagonal honeycomb shape, and it starts to iron the bonding point after checking it;
2. All the plane joints at both ends of the hexagonal honeycomb honeycomb inclined tube should be ironed. The two plane joints on both sides are required to be ironed more than four points. In the middle of the two honeycomb inclined tube planes, it is required to weld more than four points to ensure the welding is firm. ;
Third, pay attention to the operation rhythm when ironing, control the temperature, the number of hot points should not be missed;
4. Each inclined tube packing package is used as a separate ironing unit, and is stacked neatly on the site after the hot joining is completed;
5. It is necessary to cut off the power supply of the soldering iron and take it safely.
The last point is also a point that must be paid attention to, the safety of honeycomb inclined tube welding.
1. Pay attention to life safety when ironing the joints to prevent burns and electric shocks;
2, the hot-spot operation requires at least two people to be present, assist each other, and cooperate with the operation;
3, the hot-working operation is required to be carried out on an open site, and there must be a guardian during construction;
4. There shall be no flammable materials on the hot-spot site, and fire-fighting facilities must be present;
Ok, do you remember these points? Safety production and safe construction are our requirements for employees, and we also remind everyone to keep these points in mind.
The article comes from: http:// reprint please specify!
For more information on environmentally friendly materials and water treatment materials, please refer to: http://
Â
Led Trunking System Accessories
Here are mainly some LED Linear Trunking System accessories, such as Connector, Suspension Accessory, and so on.
This LED Trunking System is a system that can meet many of your lighting needs. It can also be freely combined with various connectors, so there will be more accessories. But you don`t have to worry at all, we will help you with the accessories you need. Because not all accessories are necessary, as long as you tell your needs, we will help you match them, you don`t need to worry. The installation manual also clearly describes and demonstrates all the steps, and we will always solve your problems for you.
There are mainly 3 Wire trunking linear lights, 5 Wire Trunking Linear Lights, 7 Wire Trunking Linear Lights, 8 Wire trunking linear lights, and up to 11 Wire trunking linear lights. The LED Linear Trunking System is suitable for many places, such as supermarkets. Exhibitions, shops, etc. It can also be hoisted with a single lamp, which is very flexible. You can choose the one you need by yourself, or send a message to me and I can recommend a product that suits you.
Feed In Box,Node Connector,Female Conncetor,Wire Connector,Feed In Conncetor,Power Supply Cable,End Cap,Blank Cover,Suspension Accessory,Mounting Clip
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.szlitehomelight.com