Electric hammer is a kind of common hardware tool. It is also driven by electricity, which can greatly improve the overall work efficiency and time efficiency. However, electric hammer operation is also a technical activity. The operator also needs to pay attention to some matters when operating the electric hammer. To ensure safety, what should you pay attention to before working on the hammer?
1. Confirm whether the power supply connected to the site matches the nameplate of the electric hammer. Whether there is a leakage protector to ensure safe use.
2. The drill bit and the holder should be adapted and properly installed.
3. When drilling walls, ceilings and floors, first confirm whether there are buried cables or pipes to ensure construction safety.
4. When working in a high place, pay full attention to the following objects and pedestrian safety, and set a warning sign if necessary.
5. Check if the switch on the hammer is cut off. If the power switch is turned on, the power tool will rotate immediately when the plug is plugged into the power socket, which may cause personal injury.
6. If the work site is away from the power supply, when extending the cable, use a sufficient capacity to install a qualified extension cable. Extension cables should be elevated or protected against rolling damage if they pass through a pedestrian aisle.
Concerned about surprises
Label: electric hammer operation
Previous: Micro-EDM based on RTLinux Next: Groundwater treatment in ground source heat pump design
PVC High Speed Door are designed for indoor use and ensure rapid handling operations between different areas that should remain separated. These safe and efficient industrial doors are made of a shaped steel frame and covered with PVC. These high speed doors are safe and efficient and consist of a shaped steel frame covered with PVC. Safety is ensured by their photocells and barriers.
High speed doors protect us from harm, save energy and help us to separate processes for optimal productivity. A high speed door's most important job is to simply open and close quickly and safely every time you need it.
The high speed pvc roll shutter door require high strains, caused by the high operating speed and the frequency of openings, have to be taken into account during construction. In the same way, basic conditions like size and installation location add up to considerable requirements regarding safety and control technique.
PVC High Speed Door,Large PVC High Speed Door,Transparent High Speed Door,Great Performance High Speed Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfgaragedoor.com