Wood lacquer is like wooden furniture. It can not only cover up the defects of wood surface, such as insects, frugality and chromatic aberration, but also can demonstrate the beautiful texture of wood and protect the wood. The following Xiaoshan Yayuan Xiaobian will share with me the notes on the construction process of wood lacquer and the construction of wood lacquer . Discuss the “face†project of wooden furniture.
The meaning of wood paint construction
Wood lacquer refers to a type of resin lacquer used for wood products, including polyester, polyurethane paint, etc. It can be divided into water and oil. According to the gloss can be divided into high light, semi-matt, matte. According to the use can be divided into furniture paint, floor paint and so on. The wood lacquer makes the surface of the wooden furniture more smooth and avoids direct scratches and scratches of the wooden material by the hard objects, effectively prevents the moisture from infiltrating into the wood and causes rot, and effectively prevents the sunlight from drying out and causing dry cracking of the wooden furniture.
Wood paint construction process
1, wood surface cleaning. Prior to the formal painting of the paint, the dirt, dust, etc. on the surface of the wood shall be cleaned. In order to avoid paint brushing, paint smearing uneven, uneven color distribution phenomenon. For woodwork with uneven surfaces and cracks, it must be repaired before cleaning can be done after the repair is done.
2, light. After the surface of the wood is cleaned, the surface of the wood can be sanded and polished, and the surface of the wood is smooth, which can enhance the viscosity of the paint and the surface of the wood, so as to ensure that the paint is evenly brushed and the phenomenon of shedding and cracking does not occur.
3, on the park powder. After the surface of the wood is polished, a layer of grounding powder may be applied to prevent the surface of the wood surface from appearing rough due to lighting and to ensure the smoothness of the wood surface.
4, putty. In order to ensure the flatness of the surface of the wood, the surface of the wood is subjected to a scraping process when the paint is applied. After the first pass of the putty, when it is slightly dry, sand it with sandpaper, then perform the second pass of the scraping process, and after the second pass of the scraping process, use the same paper with fine sandpaper. Polished surface.
5. Brush paint. Use a brush to pick up the paint and gently brush it on the surface of the wood. After brushing the paint for the first time, it is necessary to check whether the color is uniform or not, and then perform a putty process and polish it with fine sandpaper. A second pass of the brushing process then takes place, and at the end of the second pass of the brushing process, it is also polished with fine sandpaper.
6, waxing. At the end of the brushing process, the surface of the woodware can be polished with water sandpaper, and the waxing process is performed. After the waxing process is completed, the surface of the woodware is cleaned again.
Wood paint construction considerations
1. When the wooden paint is applied to the grounding powder, it is smeared on the surface of the woodware with a cotton wire, and rubbed back and forth by hand to ensure that it can be wiped into the eyes of the woodware.
2, when the paint brushing, the intensity of its use should be moderate, hand brush should be natural, with its movement is not loose, off the brush as the standard.
3, brushing, with less stained paint, ground-based operation, and then in accordance with the first up and down, first left and right, after the first difficult to paint brushing sequence.
Wooden tools are both practical and beautiful, and painting is an indispensable step. The above is a related introduction to the construction process of wood coatings and I hope to help you.
related articles
Water-based paint furniture is really environmentally friendly? European style furniture for you to doubt
What are the characteristics of varnish?
Left bank furniture for you to understand solid wood furniture Why paint?
Stainless Steel 0.07ml/rev Gear Pump
medical equipment pump,food processing euqipment pump,Brushless DC magnetic drive gear pump,Acid and alkali resistant gear pump
Suzhou Macxi Fluid Technology Co.,Ltd. , https://www.macxipump.com