Corridor (stairs) Feng Shui 6

Corridor (stairs) Feng Shui 6

1. The width of the corridor is usually 90 cm, but if the two are too narrow at the same time, they should be wider, usually 1.3 meters. Homes should not be connected to several rooms like a hotel and a promenade.

2. If there are corridors in the house, the toilets should only be set up on the edge of the corridor. They should not be located at the end of the corridor. The corridors in the house should not be exactly shaped like “back”.

3, the corridor is too small, to go to other rooms must be disturbed by someone else's room, in order to empty a short way, the room layout, furnishings have to be changed, so that will reduce the use of the room in half .

4, the stairs in the south, luck is not bad, if close to the door, so that the door lighting is too bright but not good. The use of reflective door materials, exposed to the summer sun, and strong reflection of light can make the eyes unclear. Therefore, going down the stairs is very dangerous. Young children always go to bright places and there are glazed stairs that make it easy for children to fall off the stairs.

5. If there is a staircase at the north gate, the winter wind will blow to the second floor. This is an unfavorable phenomenon and will affect the heating effect on the second floor. Because of the cold wind, it is easy to catch a cold and the bronchus and throat are also affected. Respiratory disorders can affect physical strength. Therefore, there is no spirit, alopecia areata, and ailments can also be caused by urinary system diseases.

6, facing the courtyard, the corridor in front of the room, usually located in the east and southeast to the southwest, is the lucky phase, because it can enjoy the sun and fresh air, so the health is also very good.

Home Feng Shui Aisle Decoration Small House Renovation Stairs Room Feng Shui Heating Arrangement

Chrome Steel Grinding Media Balls

Steel ball is a commonly used grinding medium with the following characteristics:

1. High hardness: Grinding tool steel ball is usually made of high carbon chromium steel material, high hardness, can effectively grind hard materials.

2. Strong wear resistance: Due to the use of high hardness material, grinding tool steel ball has good wear resistance, can be used for a long time and is not easy to wear.

3. Good compression resistance: After special treatment, the steel ball of the grinding tool has high compression resistance, can withstand greater pressure, and is not easy to deformation or fracture.

4. Good grinding effect: The steel ball of the grinding tool has high grinding efficiency and grinding accuracy, which can quickly and evenly grind the surface of the object to achieve the required smoothness or accuracy.

5. Widely used: Grinding tool steel ball can be used for metal materials, ceramic materials, glass and other materials grinding processing, widely used in machining, electronic manufacturing, chemical industry and other fields.

It should be noted that the appropriate size and material need to be selected according to the specific situation during the use of the grinding tool steel ball to ensure the grinding effect and service life. In addition, pay attention to safety precautions during use to avoid damage to personnel and equipment

Alloy Steel Ball

Chrome Steel Grinding Media Balls,Ball Mill Grinds Chrome Balls,Grinding Tools,Cast Iron Balls

Xuzhou Surun wear-resistant material Co., LTD , https://www.suruntools.com