How to improve the matching rate of cylindrical roller bearings

Home>Bearing knowledge>How to improve the matching rate of cylindrical roller bearings
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

How to improve the matching rate of cylindrical roller bearings

Source: Bearing network time: 2014-04-03
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Short cylindrical roller bearing is a kind of bearing with high rotation precision, accurate cooperation and primary radial load; it is mainly used for the roller support of the spindle of large-scale fine machine tools and finishing equipment. However, because the division is old-fashioned Production process and processing methods; the qualification rate of the primary bearing is low (only 60%); the huge amount of data and working hours is incurred; then the economic benefits of the business unit are further improved. In recent years, this type of bearing has become The leading product of the production and processing of the large-scale bearing division of Luozhou Group Company; the output value of production value accounts for about one-third of the division.
The improvement plan and method are aimed at the above problems; the original processing technology of the "32672" bearing has been optimized and improved; the adopted skill methods include:
4. After being in harmony with the production scheduling; on the premise of ensuring the progress of production; changing the process layout to the inner casing raceway which is greatly affected by the shortening amount; in the case of over-running of the inner raceway; Develop a corresponding method (the jacket can be properly undercut and change the middle diameter of the holder hole); to ensure the matching rate.
5, tightening the raceway to finish the public service belt; make its scale (a batch) unified in a small range; the difference between each other is small. This ensures that the qualification rate of the matching is further improved; saving a lot of time for the clearance.
1. In order to avoid heat treatment quenching, there is no residue and deformation; active contact with the heat treatment plant; cooperation to control the deformation; and according to the heat treatment shortening data supplied by the plant; properly adjust the raceway retention. This ensures heat treatment after quenching, grinding Processing allowance fits the process requirements.
2. In order to avoid the unsteady scale after final grinding; additional tempering process is added on the basis of the original processing technology; in order to eliminate the processing stress; to ensure the stability of the raceway scale.
3, after the transformation, overhaul of machine tool equipment; improve the spindle rotation accuracy; and control the amount of feed and other measures to improve the surface finish of the raceway; to avoid over-running of the raceway.
The optimized grinding process was used to guide the production; the “32672” short cylindrical roller bearing has improved the matching rate from 60% to over 96%; it greatly reduces the repair rate; saves man-hours and data; reduces the production cost.
Production and processing status and problems 2, "32672" bearing inner and outer casing raceways because of the quenching elliptical edge; the composition is not uniform; the residual stress is not uniform; then the ferrule is ground and the raceway scale is not stable; Control is within the scope of the craft rules.
3, "32672" bearing inner and outer casing raceway initial grinding processing; because the machine tool equipment aging and other reasons constitute the grinding head spindle rotation precision is low; it constitutes the rough grinding after the raceway surface is large; inviting the final grinding after the raceway scale super difference.
1. The inner and outer casing of "32672" bearing is made of Gcr15simn steel; its scale series is large; the heat treatment and quenching process is difficult to control the shortening amount and deformation degree; often it constitutes the elliptical large and no grinding processing after quenching; The inner and outer raceways are over-scaled.
4, the skills can not keep up with the harmonious operation. Because the above causes the "32672" raceway over-grinding; affects the installation clearance of the whole set of bearings; causes the clearance to be unqualified; constitutes the uncertainty of the middle of the bearing reversal; The middle path is too big or too. ū3 system 骺 行 木 木 毒 毒 娑ㄍ骋 娑ㄍ骋 娑ㄍ骋 叽缂 叽缂 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 岢 672 672 672 672 672 The pass rate is only 60%; it also constitutes unnecessary ruin of installation man-hours, processing (drilling, welding), adherence time and materials.
The target selection of short cylindrical roller bearings are divided into single row, double row, four columns and other major categories; but careful study of its layout features have many things in common: straight raceways, welding retainers, etc. The problem is also extremely similar; so the content of the optimization process will be very similar; so the selection of the shortest cylindrical roller bearing "32672" type with the largest annual output value represents the optimization of the process layout experiment; and will be carried out to other types of bearing processing In order to obtain more substantial economic benefits.
Recommend to friends comments close window

Bearing related knowledge
Reasons for bearing damage and rescue methods
SKF bearing alignment function calibration steel ball mill main bearing expansion gap is too small how to do the usual adjustment of KOYO bearing radial clearance


This article links to http://
Please indicate China Bearing Network http://

Previous:The method of improving the precision of SKF bearing device Next: Bearing layout

Washer

HCH Hardware is a bolt manufacturer and provides all kindsof fasteners since 2008. Our main products includestandard Bolts, nuts, Screws, washers, Pins and OEM parts. We have integrated resources from more than 50 top level fastener factories in Jiaxing, Haiyan, Ningbo,Dainan, Qintongareas, and have established long term relationships with them.We arenow serving for over 60 customers in South and North America.We can provide you with one stop services to meet you different needs, which can save your purchasing cost and optimize your efficiency. HCH Hardware was certified by ISO9001-2015 on 02/25/2021.We especially emphasize on products quality,HCH Hardware have necessary conditions for quality control with applicable processes and experienced experts. Appropriate production processes and quality control
actions can meet clients` highexpectation on quality and services.

Metal Washer,Steel Washers,Zinc Plated Washers,Stainless Steel Washers

Taizhou Hongchuang Hardware Co., Ltd. , https://www.jstaizhouhongchuang.com