1 As the production of such products that are novel in the country has huge profits, the market prospects are good. Since the late 1990s, a large number of manufacturers have been involved in this industry, and there has been a trend of proliferation. Some manufacturers did not use equipment (or lack of key equipment) and did not use equipment (or lack of key equipment) to operate by hand. They tried every means to cut corners and cut materials to reduce costs. They did not consider the inherent quality of the product. Some manufacturers changed the special resin to ordinary hand-paste resin, and some manufacturers would Water-proof and flame-retardant fillers were changed to ordinary stone powder of only a few hundred yuan per ton, and a large number of low-quality and low-quality products flooded the market (currently 2440 mm × 760 mm × 12.7 mm plates are priced at only about 400 yuan each), and all of them are crowned. Listed under the name of solid surface material. Most of these products have not been inspected by relevant quality inspection departments. There are a large number of bubbles and pores on the surface of the plate, which are not resistant to pollution, have volatile odors, and have extremely low strength. They do not meet the requirements for food hygiene and are cracked during use. Deformation and discoloration have occurred from time to time, seriously affecting the credibility and future of this product. At the same time, in order to occupy a certain market share, some of the products with better quality from more regular manufacturers have also had to drastically reduce the selling price of the products, resulting in serious losses or even closing down, which seriously restricts the healthy development of the industry.
2 For many consumers, there is no way to identify the intrinsic quality of artificial stone solid wood. The media also lacks an introduction in this regard, and it is only the introduction of manufacturers or business sales personnel. Some manufacturers often use unscrupulous methods to sell poor quality products. Even if the quality of the sample is better for the consumer, the product that is ultimately delivered to the customer is inferior. When the user finds quality problems during use, the manufacturer does everything possible. Rejection of responsibilities, and some manufacturers have changed their face or find it difficult to trace. At the same time, because of the limited economic strength of the purchaser, it is also necessary to pursue fashion. Therefore, some products with low prices will have markets.
3 China is still at the stage of development of the market economy, and the laws and regulations that it supports are still not fully developed. Even if there are laws and regulations in this area, the quality of artificial stone solid surface materials is not related to the personal safety of consumers. The relevant government departments have never asked, and there is no obstacle to accessing the market. The production and sales volume of artificial stone solid surface materials in the country is very large, but there is not a unified standard for products in this area so far. Some manufacturers even include some manufacturers with large output to apply some foreign standards that are not suitable for China. Some even apply the metal standard, and some use the standard that has already been eliminated. It is impossible to completely reflect the quality of the artificial stone solid surface material, and some lower-quality manufacturers do not know even the standard, and only some are copied. The technical indicators of the manufacturer's products.
4 The current status of production equipment is as follows: First, the introduction of foreign equipment for huge amounts of money (millions or even tens of millions of yuan), and secondly, only one vacuum mixer (common in China), both of which are only vacuum mixing, and When the sheet is formed, it also brings in a lot of air. Although the method of vibration and smoothing is used to re-discharge the bubbles and the defoamer is added to increase the amount of resin, there are still a lot of bubbles in the product, which is not a solid surface in the real sense. Material, and high cost, especially the huge investment in the equipment used to occupy a large space, high energy consumption, depreciation, maintenance costs, interest on funds is very high, the production of no profit at all.
2 For many consumers, there is no way to identify the intrinsic quality of artificial stone solid wood. The media also lacks an introduction in this regard, and it is only the introduction of manufacturers or business sales personnel. Some manufacturers often use unscrupulous methods to sell poor quality products. Even if the quality of the sample is better for the consumer, the product that is ultimately delivered to the customer is inferior. When the user finds quality problems during use, the manufacturer does everything possible. Rejection of responsibilities, and some manufacturers have changed their face or find it difficult to trace. At the same time, because of the limited economic strength of the purchaser, it is also necessary to pursue fashion. Therefore, some products with low prices will have markets.
3 China is still at the stage of development of the market economy, and the laws and regulations that it supports are still not fully developed. Even if there are laws and regulations in this area, the quality of artificial stone solid surface materials is not related to the personal safety of consumers. The relevant government departments have never asked, and there is no obstacle to accessing the market. The production and sales volume of artificial stone solid surface materials in the country is very large, but there is not a unified standard for products in this area so far. Some manufacturers even include some manufacturers with large output to apply some foreign standards that are not suitable for China. Some even apply the metal standard, and some use the standard that has already been eliminated. It is impossible to completely reflect the quality of the artificial stone solid surface material, and some lower-quality manufacturers do not know even the standard, and only some are copied. The technical indicators of the manufacturer's products.
4 The current status of production equipment is as follows: First, the introduction of foreign equipment for huge amounts of money (millions or even tens of millions of yuan), and secondly, only one vacuum mixer (common in China), both of which are only vacuum mixing, and When the sheet is formed, it also brings in a lot of air. Although the method of vibration and smoothing is used to re-discharge the bubbles and the defoamer is added to increase the amount of resin, there are still a lot of bubbles in the product, which is not a solid surface in the real sense. Material, and high cost, especially the huge investment in the equipment used to occupy a large space, high energy consumption, depreciation, maintenance costs, interest on funds is very high, the production of no profit at all.
Plate
Pressure Tank is suitable for automatic Polishing Wax spray system, which is highly efficient, energy-saving and convenient!
saving 25% of the polishing liquid, and the high-pressure system can completely penetrate the abrasive on the grinding wheel, which can save 25% of the waste caused by the rotation of the grinding wheel
The tool of automatic polishing wax spray, instead of manual waxing, can effectively improve the polishing efficiency, save labor and raw materials, and strengthen the polishing effect.
Automatic wax spraying system dedicated pressure bucket, automatic polishing high-pressure spray gun, polishing wheel dedicated center iron
Jiangmen Gude Polishing Equipment Co., Ltd , https://www.kokipolishing.com