Structural characteristics of hydraulic transmission concrete pump

Concrete pump, is the use of pressure concrete along the pipeline for continuous delivery of machinery. Consists of pump body and delivery pipe. According to the structure is divided into piston type, squeeze type, hydraulic diaphragm type. Pump body mounted on the chassis of the car, and then equipped with telescopic or inflatable fabric rod, to form a pump. Hydraulic transmission concrete pump consists of hopper, hydraulic cylinder and piston, concrete cylinder, distribution valve, Y-shaped pipe, flushing equipment, hydraulic system and power system. The hydraulic system pushes the piston back and forth by pressure. When the piston moves backward, the concrete will be pressed into the conveying pipe through the Y-shaped pipe before pushing. After the pump concrete is over, clean the pump body and delivery pipe with high-pressure water or compressed air. Piston concrete pump displacement, depending on the number and diameter of concrete tanks, piston reciprocating speed and volume of concrete cylinder suction efficiency. Hydraulic pump concrete pump system consists of hydraulic pumps, hydraulic motors, hydraulic cylinders, accumulators, filters, coolers, valves, pressure gauges, tubing and fuel tanks and other components, generally divided into four subsystems: the main pump hydraulic system, Boom leg and turntable hydraulic system, pump truck mixing and cooling hydraulic system and washing hydraulic system. In order to reduce the weight of the hydraulic components such as the hydraulic cylinder on the fabric rod, the cloth rod and the leg circuit adopt a higher rated pressure. The hydraulic system of pump truck varies with different models, but its basic working principle is the same. In concrete pump hydraulic system, due to performance requirements, the system often has safety valves, relief valves and sequence valves. If the safety valve pressure is too low, the safety valve will be frequently opened, resulting in overflow loss, resulting in system fever; if the pressure is too high, it will increase the system leakage, the system fever, therefore, should be hydraulic system Load requirements, correct calculation and adjustment of safety valves and pressure values ​​to ensure that the system operates within the specified pressure range. When the main pump pump system for the closed loop system, the pump system must be located in the heat exchange circuit, the heat exchanger circuit relief valve set pressure should pay attention to setting the pressure is too low, will pump Hydraulic cylinder to increase the impact, set the pressure is too high, will make the overflow loss is too large, the system temperature is too high. If the internal control sequence valve to adjust the pressure is too high, when the working pressure of the hydraulic cylinder is lower than the adjustment pressure, there is pressure loss of the sequence valve port, causing temperature rise, resulting in system fever, a reasonable set of internal control sequence valve settings Pressure, the working pressure of the working cylinder is higher than the opening pressure of the sequence valve. When the sequence valve is in operation, the valve port will be fully open and the valve port will be substantially pressure-free, thereby avoiding the system heat caused by the improper setting of the sequence valve .

Cold Storage Room Fast Door

Cold storage room fast door are used to industrial warehouse applications, our cold storage doors combine the latest technology, premium materials and design features to meet the demanding requirements of the cold storage industry. Available as a sliding, swing and vertical lift door, all Cold Guard doors incorporate a tough and thermally neutral fiberglass reinforced pultrusion framework, extruded plastic polymer casings and Non-CFC foamed-in place polyurethane core. We understand the conditions that cold storage doors must endure. Superior design methods and non-corrosive materials ensure that Cold Guard will perform and look good for years to come!

The advantages of cold storage fast room door

Excellent Insulation Properties

Save Money on Temperature Costs

A Variety of Cold Room Options

Temperature Control and Efficiency

One of the most important benefits of our cool room panels is passive temperature control.

Safety for You Too

Not only are our cold room panels very hygienic, they also allow for superior safety. Their low allergenic qualities and enhanced seismic performance will protect you while you`re at work.

Cold Storage Room Fast Door,Freezer Room Fast Door,Freezer Room Insulated Fast Door,Thick Curtain High Speed Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfgaragedoor.com