The role of varistor thermistor in the power circuit


Generally, it is necessary to avoid the inrush current generated when switching on and off in an electronic circuit, so in the power circuit we usually connect one in series.

Power type thermistor, which can well suppress a surge current when switching on and off. When the thermistor is connected in series with AC

The road is mainly used for "current insurance", and the varistor gear is connected in the AC circuit to "restrictive voltage is high"

The role.

So what is the working principle of the varistor? Let's say here a varistor that says "nominal 300 volts"

It works when our normal residential electricity uses 220 volts, and if it rises to 310 volts, it exceeds 300 volts.

Once this happens, our varistor will be broken down, and after passing a large current, it will blow our insurance.

Wire, once our fuse is blown, it will protect the circuit behind it. In this case, the varistor will be very fast.

Restored to the previous working state.

But whether it is a varistor or a thermistor, after working for a period of time under normal power conditions, if you continue to do it again and again

Switching on, this will cause a lot of damage to our power supply, mainly due to the temperature of the thermistor or varistor

Ascending, its relative resistance will decrease, this time will have a great impact on the ability to suppress the surge, indicating that its ability to limit is very

Limited. Http://

teapot set

One of the teapots worth mentioning is the long mouth teapot, which is commonly used in tea ceremony performances.

The long beaked teapots we saw for the performance are mostly bronze, and some are made of iron and tin, also known as the long spouted teapots. A tea maker with no flow is called a no flow pot, which can also be slightly raised; Short flow kettle --- a teapot with the spout water outlet separated from the chamber within three inches; Medium flow kettle --- the distance from the water outlet to the kettle chamber is about three inches to two feet; The teapot whose spout is more than two feet away from the pot cavity is called a long flow pot. In ancient times, the spout of Changliu Pot was usually three feet long, which is why the commonly known "one meter long pot" came into being.

Teapot Set,Teapot Set Argos,Teapot Set Arita,Asian Teapot Set

The universe in the stone is great , https://www.zdsarts.com