Tianjin stainless steel market


In recent days, the market for stainless steel in the Tianjin market has remained stable, but the price has remained at a relatively high level. Market transactions are generally in the end, mainly because it is difficult for end users to accept this price.

In addition, the current market supply is limited, we have generally optimistic about the market outlook, it also caused the market to be light.
Document.write("
");xno = xno+1;

Cold-rolled materials: The current market price of TISCO 304/2B 1.0mm and above are from 28800-28900 yuan/ton, and coil price is up to 31000-31200 yuan/ton. The price of Qingpu Zhangpu is 200 yuan/t higher than that of TISCO. Tianguan's price has a gap of 200-300 yuan/ton with TISCO's price. The price of the 400 series was basically stable with no significant changes.

Hot-rolled materials: Thin and medium plates are also rising. Which 304/NO.1 import 4-5.0mm flat plate quoted at 28,800-28,900 yuan / ton, 6.0,8.0 mm quote to 29,200 -29,500 yuan / ton. The price of 4-Allum Pickling Board 4-5.0mm rose to 28,500 Yuan/ton, 6.0, 8.0mm to 28,800 Yuan/ton, and 10.0mm to 28,800 Yuan/ton. The raw edge of the pickling plate is about 300 yuan/ton lower.

In the mid-table, although the recent price increase is relatively large, but the transaction is generally less supply. The Dageng 8.0 quotation is about 28500-29,000 yuan/ton, 10.0mm is about 29500 yuan/ton, and the resource market above 12.0mm is 29200 yuan/ton. TISCO’s 10.0-20.0mm quoted price rose to 29,000-29200 yuan/ton, and 20.0mm flat quoted price was 29,500 yuan/ton.

Sanitary Rotor Lobe Pumps

Rotary Lobe Pumps
Rotary Lobe Pump is a positive displacement designed lobe rotor pump, according to 3A standard with a very strict hygienic requirements to equipment and processes. Rotary lobe pump is ideal for the transferring of viscous materials as well as low-viscous media in the food processing, cosmetics and pharmaceutical industries. Kaysen provides various Sanitary Pumps for your processing equipment.

Material
Investment casting pump body: AISI 304/316L.
Cast iron support and gear box: QT450-10.
Gaskets (standard): EPDM(FDA 177.2600).
Mechanical sealing(standard): C/SiC/EPDM.
Internal surface finish: Ra<=0.6?m.
External surface finish: Mirror polished.

Technical specifications
Max.flow: 90m3/h/395 GPM
Max.pressure: 12bar/174 PSI
Max.working temperature: 150°C/302°F
Max.rev: 1450 rpm

Options
Mechanical sealing: SiC/SiC, TgC/ Sic
Gaskets: FPM (VitorR) or PTFE
Relief valve at the front cover or external by-pass
Flushed single or double mechanical seal
Vertical TUR series or Horizontal TUL series
Built-in safety valve
End-face heat jacket
Complete heat jacket
Adjustable feet
Different drives and fixes:
Manual adjust continuously variable transmission
Frequency converter adjust motor gear box
Fixed speed output transmission
Assembly on a stainless steel baseplate
Inlet&Outlet Connection: Tri-Clamp, Threaded to DIN, SMS, 3A, RJT, IDF, ISO etc
Motor type B5, motor frequency 50HZ, 60HZ
Voltage 220-240, 360-400, 420-460, 630-690 (V)

Sanitary Rotor Lobe Pumps,Sanitary Rotor Pumps,Stainless Steel Sanitary Rotor Pumps

Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com