we also supply galvanized steel coil ,galvalume steel coil ,prepainted steel coil and sheetÂ
Floor Deck Introduction
Floor deck, also called steel bearing plate, building pressure plate, by using galvanized steel sheet to rolling cold roll forming, its section into a v-shaped, u-shaped, trapezoid or similar these types of waveform, mainly used for permanent template, and also be selected for any other purpose.
The advantages of Composite floor slab:
(1) light weight
(2) high strength
(3) big stiffness
(4) construction convenient quick and convenient
(5) easy to update
(6)Easy to industrial production portfolio
Other names
Composite slab, Floor deck, steel bearing plate, pressure plate, floor plate, steel floor deck, composite floor board, the galvanized steel bearing plate, galvanized floor plate, galvanized floor deck, composite Floor deck, composite slab, the floor of the steel plate, building pressed steel plate, composite slab, etc., is divided into: Opening Floor deck, full closed type Floor deck, dovetailed Floor deck (also called shrink mouth type Floor deck), etc
Performance of composite slab:
Save a lot of temporary template. Leave out all or part of the template support to reduce the amount of concrete. Reducing the permanent load of the structure, More important significance for high-rise buildings and seismic zone, not only save a lot of labor in the transport, storage, installation. Reduce the workload Facilitate the laying of communication, electric power, heating pipelines etc. But also can lay material such as heat preservation, sound insulation, heat insulation, vibration isolation. To improves the performance of the floor Give full play to good tensile strength and ductility of the steel and excellent compressive strength and rigidity of concrete.
Â
| Thickness(mm) | Moment of Inertia(cm4/m) | Section of Modulus(cm3/m) |
| 0.8 | 106.6 | 24.46 |
| 1.0 | 127.9 | 30.76 |
| 1.2 | 171.3 | 42.15 |
| 1.5 | 214.1 | 52.41 |
Â
Plastic Waterstop Seal provides water barrier across all joints in concrete structures by placing Water Stops into edges of adjacent concrete components. Water Stops are essential for use in all water retaining and water excluding structures, being capable of withstanding water pressure from either internal or external face.
Rubber Water-Stop Belt utilizes the rubber is high elasticity and the compression deformation characters, have the elastic deformation under each kind of load, thus to effective fastening seal, guards against infiltrates and leaks. It has high elasticity, ageing resistance, low compression deformation and good tearing strength performance.
Features of waterstop
1. The waterstop will expand when getting in touch with water, so allowing it to come into closer contact with the concrete, creating a better water-stop result.
2. Different thicknesses structure of waterstop is adopted for the cross section, which is divided into the high-strength area, the waterproof area and the installation area, allowing for uniform and reasonable stress for all portions.
3. There is installing hole at installation area of waterstop, it could facilitate fixed with adjacent reinforced, and not produce shifting. Construction of our Rubber Water stop is convenient
rubber Water-Stop Belt function: mainly used for the tunnel and bridge project,such as the overpass ,water and electricity projects etc.
two types:1 affixed to the back-half hole in the middle
2 embedded in the middle with hole
features: good flexibility; strong ability to adapt to the deformation;simple structure;reliable water tight seal.
specifications:back-paste-type;buried-in-type
concrete specifications can be requested by client.
Water-Stop Belt,Rubber Water-Stop Belt,Pvc Water-Stop Belt,Water-Stop Belt For Building
Shandong Tianhai New Materials Engineering Co., Ltd , https://www.chinatinhy.com