Model NO.: 5 1/2"
Performance: Pumping Oil
Application: Oil and Gas
Trademark: Baofeng
Transport Package: Wooden Box / Standard Package
Specification: SGS
Origin: Shandong Weifang
Model NO.: 5 1/2"
Performance: Pumping Oil
Application: Oil and Gas
Trademark: Baofeng
Transport Package: Wooden Box / Standard Package
Specification: SGS
Origin: Shandong Weifang
Progressive Cavity Pump System (PC Pump)Progressive Cavity Pump (PC Pump) System is a new kind of oil production equipment. The system consists of Surface Drive Head and Downhole part, electrical control cabinet.
Advantages:
It has advantages of one-time low investment, high oil production efficiency, low energy consumption, simple structure, and easy operation, installation and maintenance.
Driven Shaft Bevel/Gear Shaft with 63 gears:
Elevator:
Our workshop:
 PC pump, this new production has been widely used in recent years in oil fields at home and abroad and plays an important role in crude oil fields. Our company has committed to research and development of screw pump and its accessories for many years. We already got more than 50 kinds of screw pumps, in displacement ranged from GLB20to GLB3000, and well depth over 2300m. There are single head PC pump for ordinary crude oil physical property, high temperature PC pump adapted to 170 degree and bimetal type for 350 degree, hollow rotor PC pump applied to heating pump and flushing, uniform thickness PC pump suitable for depth over 1800m or extraction needs of crude oil contained high hydrogen sulfide, high hydrocarbon, high gas physical properties and Special type for CBM drainage gas.
The PC pump can both adapt to low viscosity crude oil and to heavy oil, high freezing point oil, high wax content oil, high sand content oil and high gas content oil. It is irreplaceable with its high advantage to help to change dried-up well to living well.
For the use of PC pump, we have four driving head device for option, Belt Gear Reduction Transmission (horizontal), Gearless Transmission (vertical), Direct Drive Motor Gearing and Eccentric Test Gearing. According to the promotion recent years, it is a trend that the PC pump will replace the large heavy beam-pumping unit in shallow well and middle-deep well. It has advantage of one-time low investment, high oil production efficiency, low energy consumption, simple structure, and easy operation, installation, and maintenance. Along with the improvement of application technology and oil production equipment, PC Pump will be widely used in future.
PC Pump Setting Parameters
| Setting depth(m) | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 |
| Lifting distance (mm) | 550 | 650 | 750 | 850 | 950 | 1100 | 1200 | 1300 |
GLB series of PC Pump Parameters
|
Model |
Length (mm) |
Maxi. Diameter (mm) |
Rotor screw (in) |
Stator upper screw(in) |
Stator lower screw(in) |
Rod rate (rpm) |
Theoretical dairy flow(m3/d) |
Applicable tubing(in) |
Sucker rod(in) |
Head(m) |
| GLB\10/35 | 2940 | 90 | 15/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 1-4 | ≥73 | 7/8″ | 1000-1400            |
| GLB\28/40 | 3650 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 3-6 | ≥73 | 7/8″ | 1200-1600 |
| GLB\40/12 | 1550 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 4-9 | ≥73 | 7/8″ | 600-800 |
| GLB\40/14 | 2200 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 4-9 | ≥73 | 7/8″ | 400-600 |
| GLB\40/21 | 2330 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 4-9 | ≥73 | 7/8″ | 700-1000 |
| GLB\40/42 | 4670 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 4-9 | ≥73 | 7/8″ | 1200-1800 |
| GLB\50/21 | 2380 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 5-10 | ≥73 | 7/8″ | 700-1000 |
| GLB\75/14 | 2140 | 90 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 6-15 | ≥73 | 7/8″ | 400-600 |
| GLB\75/21 | 2200 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 6-15 | ≥73 | 1″ | 700-1000 |
| GLB\75/40 | 4410 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 6-15 | ≥73 | 1″ | 1200-1600 |
| LB\120/18 | 3000 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 1″ | 500-800 |
| GLB\120/21 | 2932 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 1″ | 700-1000 |
| GLB\120/27 | 4428 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 1″ | 800-1000 |
| GLB\120/36 | 5865 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 1″ | 1100-1400 |
| GLB\120/40 | 5900 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 1″ | 1200-1600 |
| GLB\165/35 | 5650 | 114 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 14-36 | ≥73 | 1″ | 900-1300 |
| GLB\190/33 | 5650 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 15-40 | ≥73 | 1″ | 900-1300 |
| GLB\200/27 | 5650 | 114 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 17-42 | ≥73 | 1″ | 800-1000 |
| GLB\300/21 | 4850 | 114 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 25-60 | ≥73 | 1″ | 700-1000 |
| GLB\300/26 | 6000 | 114 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 25-60 | ≥88.9 | 1″ | 700-1000 |
| GLB\300/33 | 6200 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 25-60 | ≥88.9 | 1″ | 800-1200 |
| GLB\420/20 | 4820 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 35-70 | ≥88.9 | 1″ | 700-1000 |
| GLB\500/14 | 3380 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 40-80 | ≥88.9 | 1″ | 600-800 |
| GLB\500/21 | 5060 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 40-80 | ≥88.9 | 1″ | 700-1000 |
| GLB\600/18 | 7122 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 85-130 | ≥88.9 | 1″ | 500-900 |
| GLB\230/2-30 | 6200 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 20-50 | ≥88.9 | 1″ | 900-1200 |
| GLB\450/2-24 | 6520 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 39-97 | ≥88.9 | 1″ | 700-1000 |
| GLB\800/2-16 | 5020 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 70-173 | ≥88.9 | KG36″ | 500-700 |
| GLB\800/2-24 | 7120 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 70-173 | ≥88.9 | KG36″ | 700-900 |
| GLB\1200/2-16 | 6640 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 103-260 | ≥88.9 | KG36″ | 600-800 |
| GLB\1400/2-16 | 7420 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 120-302 | ≥88.9 | KG36″ | 600-800 |
| GLB\1600/2-14 | 7420 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 138-345 | ≥88.9 | KG36″ | 500-700 |
| GLB\1800/2-14 | 7470 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 155-388 | ≥88.9 | KG36″ | 500-700 |
| GLB\2500/2-8 | 7470 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 216-540 | ≥88.9 | KG36″ | 400-600 |
| GLB\3000/2-8 | 7680 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 260-648 | ≥88.9 | KG36″ | 400-600 |
| GLB\4000/2-6 | 7680 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 430-1080 | ≥88.9 | KG36″ | 400-600 |
| GLB\75-47/K | 5465 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | < Car polishing pad is used to polish car paint to remove flaw on car paint such as ,sand marks,scratches,swirl marks,oxidation and other kinds of stains and contamination. The attachment style of polishing pad we offer has Backing Plate style and velcro style,backing style we have M14,M16 and 5/8"-11 Our polishing pad is made of high quality sponge imported from German,and has excellent tensil and durability,each polishing pad can polish 10-20 cars,and we offer differernt package for your to choose,such as pp bag ,blister and carton paper,you can also costomize the size you want. We also have different clolor of car polishing pad,such as green,yellow,maroon,orange,blue,red and black, different color has different cutting force for different purpose,you can choose the right color depends on the situation of your car paint. As the shape of polishin pad,you can also customized the one you want,we have regular shape ,such as honeycomb,triangle,mesh and diamond ,and other shape you want. Foam Buffing Pad,Polishing Foam Pad,Sponge Polishing Pads,Meguiars Polishing Pads Foshan SUMEITE Grinding Technology Co.,Ltd , https://www.aedetail.com |