Solid wood furniture refers to furniture that has been finished with solid wood sawn timber or solid wood panels and whose surface has been finished with finishes; or that has been finished with solid wood veneer or veneer on such substrates. Solid wood furniture maintenance six major attention: beware of hard objects scratching; away from heat source sunlight; maintenance surface cleaning; avoid alcohol and gasoline; be alert to humid environment; carry out water lock treatment.
Solid wood furniture maintenance should be careful to scratch the hard object Titan Madi reminds not to let hard metal products or other sharp objects collide with the furniture to protect the surface from scratches. Do not scratch the furniture with a hard cleaning tool when performing hygienic maintenance.
The maintenance of solid wood furniture should be kept away from the heat source. In the winter, it is best to place the furniture at a distance of about 1 meter away from the warm air such as the radiator or the air conditioning vent, to avoid the local cracking of the wood after the solid wood furniture is baked for a long time. Deformation or local deterioration of the paint film. Of course, don't let the sun shine directly onto the furniture.
Solid wood furniture maintenance three to maintain surface cleaning Solid wood furniture surface coated with paint, the maintenance and maintenance of its paint film is particularly important, once the paint film is destroyed, not only affects the surface aesthetic, but will further affect the internal structure of the product. Therefore, the furniture should be kept clean, and the surface dust should be gently wiped off with a dry cotton cloth every day. At intervals, the dust on the corners of the furniture should be wiped clean with a damp cotton cloth with water. Dry clean soft cotton cloth.
Solid wood furniture maintenance four to avoid alcoholic gasoline furniture surface, such as stains, do not rub hard, gently remove the stains with warm water, wait until the water is evaporated, apply a little light wax in the original part, and then lightly wipe several times to form Protective film. Avoid using alcohol, benzine or other chemical solvents to remove stains to avoid damage to the furniture.
The maintenance of solid wood furniture should be vigilant in the humid environment. The indoor humidity is high in summer, especially the moisture on the first floor is larger. It is better to use thin film to separate the furniture from the ground, and try not to let the furniture close to the wall, but The wall is kept at a pitch of 0.5 cm to 1 cm.
Solid wood furniture maintenance six to lock water treatment
Not only should you use a damp cloth to wipe, but you should also use professional furniture care essential oils. Some special ingredients contained in the essential oil can lock the moisture in the wood to prevent dry cracking. At the same time, it can nourish the wood, make the wooden furniture shine from inside to outside, and more importantly, extend the service life of the wooden furniture. In addition, some carved solid wood furniture is more beautiful, but also need to pay attention to dust when using, especially in the case of indoor air drying, the carving of furniture is more likely to be ash, need to be often wiped with a semi-wet towel.
Source: GO Jiaju Furniture Network
PP plastic, polypropylene, commonly known as "baijiao",Scientific name: polypropylene.
Description:
PP Plastic is a kind of semi crystalline material. It is more hard than PE and has a higher melting point. Due to the high crystallinity, the surface of the material stiffness and resistance to scratch characteristics very well. PP Plastic don't have the problem of environmental stress cracking.Polypropylene (PP Plastic) is a semi-crystalline thermoplastic.PP Plastichas high impact resistance, strong mechanical properties, resistance to many organic solvents and acid and alkali corrosion.
PP Plastic is widely used in industry and is one of the most common polymer materials.
Australian COINS are also made of polypropylene.
Polypropylene bonding:
K-720 is suitable for polypropylene PP plastic adhesion, suitable for large area plate lamination, high transparency, suitable for PP adhesion PP, PP adhesive PC, PP adhesive ABS,PP adhesive PVC, PP adhesive acrylic, PP sticky metal, PP stick wood.
K-7007 adhesion performance is roughly the same as k-720, light yellow and more economical.
K-620 is adhesive small area polypropylene PP glue, must be used with the k-650 treatment agent, the instant positioning, the strength is high.
Advantages:
1. Low density;
2. Heat resistance ;
3. Non deformation;
4. High stiffness;
5. High surface strength;
6. Good chemical stability;
7. Nontoxic and safe.
Disadvantage:
The main disadvantage of the fault polypropylene is that the high temperature rigidity is not enough, and the low temperature is brittle.
Poor environmental tolerance, outdoor use, easy to turn yellow and brittle.
Tensile strength of anisotropy, the products are easy to deform, continuous use of low temperature, high creep performance, and long - term load.
Poor printing performance.
Application:
1,Valve part, drinking water and sewage water pipe,
2,Sealing element, spraying carrier,
3,Corrosion-resistant trough and barrel, industrial applications that have acid and alkali-resistant requirement; wastewater and gas discharge equipment for industrial purpose,
4,Scrubbing tower, clean room, semiconductor plant and other related industrial equipment and machinery, food machinery and chopping board,
5,Electroplating process, toy part
Combustion characteristics: PP Plastic easy to burn, polypropylene from continue to burn after the fire, with the top of the flame is yellow, the bottom made in blue, with a small amount of smoke generated, burning melt dripping, and oil.
Specification: the thickness of PP sheet material can be produced from 0.3mm to 2mm, and the PP sheet material is of rolling material and width of 500-1000mm.
The thickness of the plate can be produced from 2mm to 200mm. The specification is 600*1200mm 1000*1000mm 1000* 2000mm. Other specifications can be customized as needed,and The diameter of the PP rod can be produced from 2mm to 250mm, the length is 1 meter, PP rod can be ordered to be more than 3 meters in length.
Color: white and black, other colors can be customized
Modified varieties: PP sheet have various enhancers and other auxiliaries can be added to make modified varieties, depending on the requirements
Storage methods:
Keep in tight, cool and dry place to ensure good ventilation
Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.
Pp Plastic Rod,Polypropylene Plastic Rod,Extruded Polypropylene Plastic Rod,Pp Plastic Welding Rods
Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com