China board trading network news:
Plywood, also known as plywood, commonly known as the fine core board. It is made by hot pressing three or more layers of one-millimeter thick veneer or sheet glue. It is the most commonly used material for hand-made furniture.
1, solid wood board
Solid wood panels are wood panels made from solid wood. These boards are durable and have natural lines, and are the best choice for decoration. Due to the high cost of this kind of sheet and the high construction process requirements, there is not much use in decoration. Solid wood panels are generally categorized according to the physical name of the panel and there is no uniform standard specification.
2, plywood
Plywood, also known as plywood, commonly known as the fine core board. It is made by hot pressing three or more layers of one-millimeter thick veneer or sheet glue. It is the most commonly used material for hand-made furniture.
Plywood is generally divided into three kinds of plates, 5 PCT board, 9 PCT board, 12 PCT board, 15 PCT board and 18 PCT board of six kinds of specifications (1 PCT is 1 mm).
What are the types of wood? How to differentiate?
3, decorative panel
Decorative panels, commonly known as panels. It is a veneer with a thickness of about 0.2mm, and a veneer with a single-sided decorative effect. It is a special way of plywood, with a thickness of 3%. Decorative panels are currently an advanced decoration material that is different from the oil mixing practice.
4, blockboard
Blockboard, commonly known as Daxinban in the row. Daxin board is made of two pieces of veneer and pressed and spliced ​​with wood. The price of the big core board is lower than that of the fine core board, and its vertical direction (distinguished by the core material) has poor flexural compressive strength, but its transverse bending strength is high.
5, particle board
Particleboard is a thin plate made of wood scraps as the main raw material, then infiltrated with glue and additives are pressed. According to the pressing method, it can be divided into two types: extruded particle board and flat pressed particle board. The main advantage of this kind of sheet is that the price is extremely cheap. The disadvantages are also obvious: the intensity is extremely poor. Generally not suitable for making larger or mechanical requirements of furniture.
6, MDF
MDF, also known as fiberboard.
The artificial board made of urea-formaldehyde resin or other suitable adhesives based on wood fiber or other plant fibers is classified into high-density board, medium-density board, and low-density board depending on its density. MDF is also easy to rework because of its soft and impact resistance.
What are the types of wood? How to differentiate?
7, fire board
Fire board is made of silicon or calcium material as the main raw material, and a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives mixed by autoclave technology made of decorative plates.
8, melamine board
Melamine board, the full name is melamine impregnated film coated wood-based panels. The paper is made of melamine resin adhesive soaked in paper with different colors or textures, and then dried to a certain degree of curing, and it is paved on the surface of particleboard, medium density fiberboard or hard fiberboard, and then heated and pressed.
The above information, relevant Baoyuan plate supply information, plate purchase, etc. Please pay attention to the Chinese plate trading network
Residential Sectional Garage Door
A typical version of an overhead garage door used in the past would have been built as a one-piece panel.The panel was mounted on each side with unequal parallelogram style hinge lifting mechanism. Newer versions of overhead garage doors are now generally built from several panels hinged together that roll along a system of tracks guided by rollers. The door is balanced by either a torsion spring system or a pair of extension springs.A remote controlled motorized mechanism for opening garage doors adds convenience, safety, and security
• Aluminum garage doors are low-cost, light, rust-proof, and feature low-maintenance. They are prone to denting because aluminum is not strong and they are energy-inefficient since aluminum is a highly conductivematerial.
• Fiberglass and vinyl garage doors are composite units, combining a steel core behind a fiberglass or vinyl skin. They have also polyurethane insulated base sections, or other type of foam insulation. These premium doors can match steel garage doors, and be a realistic imitation of wood (namely fiberglass units), but they may be more expensive than steel units.
• Steel doors have become common and are available in a variety of sizes and styles, provide strength and security, are cost-competitive, and may have optional insulating value. Extra strength is available with two or three layers of galvanized steel with a low gauge number (23-24 gauge steel panels).
• Wood garage doors offer aesthetic appeal, but they are high-maintenance and may be expensive. Low-priced wood garage doors may warp and break easily.
Residential Sectional Garage Door,Automatic Metal Sectional Garage Door,Standard Lift Garage Door Drum,Polyurethane Foam Garage Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.highspeedshutterdoor.com